[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Use of bearings in (static) mirror cells

To: <atm@atmlist.net>
Subject: Re: [ATM] Use of bearings in (static) mirror cells
From: "Don Clement" <clement.focuser@verizon.net>
Date: Wed, 20 Apr 2005 13:39:49 -0700
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <HNEXFE10uSTOk0gaPEl0001fb18@hnexfe10.hetnet.nl><001c01c545e3$902d2e60$0301a8c0@Acer>
Sender: atm-bounces@atmlist.net

My point is in a compliant flexure there is zero stiction and very little
friction. Using a compliant flexure for the bearings in (static) mirror cell
makes the discussion about sliding friction, rolling friction, bearing
lubrication, and stiction ... moot.



Don Clement

Running Springs, California

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re[11]: [ATM] Use of bearings in (static) mirror cells
  - From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>

Prev by Author: Re: Re[4]: [ATM] Use of bearings in (static) mirror cells
Next by Author: Re: [ATM] Use of bearings in (static) mirror cells
Prev by thread: Re[11]: [ATM] Use of bearings in (static) mirror cells
Next by thread: Re[12]: [ATM] Use of bearings in (static) mirror cells
Index(es):
- Author
- Thread