[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Use of bearings in (static) mirror cells

To: <atm@atmlist.net>
Subject: Re: [ATM] Use of bearings in (static) mirror cells
From: "Don Clement" <clement.focuser@verizon.net>
Date: Tue, 19 Apr 2005 21:32:40 -0700
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <200504192052.AA69337328@mail.johnspics.com><004101c5455b$19bd1610$6401a8c0@hugo>
Sender: atm-bounces@atmlist.net

 FYI - a couple of references on flexure design:



"Flexure-Pivot Bearings" by Warren D. Weinstein Senior engineer Sperry
Gyroscope Co. great Neck, N.Y.,  Machine Design, p150 June 10, 1965 and
p136, July 8, 1965



"How to design Flexure Hinges" by J.M. Paros - Research Scientist and
L.Weisbord - project manager Gyrodynamics Research General Precision
Aerospace, Little Falls N.J.

Machine Design, p151,  Novemeber 25, 1965



Don Clement

Running Springs, California

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Use of bearings in (static) mirror cells
  - From: "john sherman" <atm@mail.johnspics.com>
- Re: [ATM] Use of bearings in (static) mirror cells
  - From: "Don Clement" <clement.focuser@verizon.net>

Prev by Author: Re: [ATM] Use of bearings in (static) mirror cells
Next by Author: Re: [ATM] Use of bearings in (static) mirror cells
Prev by thread: Re: [ATM] Use of bearings in (static) mirror cells
Next by thread: Re[2]: [ATM] Use of bearings in (static) mirror cells
Index(es):
- Author
- Thread