Amateur Telescope Makers (ATM) Archive for APR05 - by author

• Thread Index

• RE: [ATM] Question About Dobsonian Design
  • From: "Alan Scott" <alanne1956@hotmail.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Alan Scott" <alanne1956@hotmail.com>
• RE: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: "Alan Scott" <alanne1956@hotmail.com>
• RE: [ATM] Alan Scott's Deep Space telescope
  • From: "Alan Scott" <alanne1956@hotmail.com>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: "Alan Scott" <alanne1956@hotmail.com>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: "Alan Scott" <alanne1956@hotmail.com>
• RE: [ATM] Alan Scott's Deep Space telescope
  • From: "Alan Scott" <alanne1956@hotmail.com>
• RE: Re[2]: [ATM] Hello list,some basic question for a new Dobsonian builder
  • From: "Alan Scott" <alanne1956@hotmail.com>
• RE: [ATM] New with starters questions
  • From: "Alan Scott" <alanne1956@hotmail.com>
• [ATM] [UPDATE] Alan Scott's Deep Space telescope - double sided tape
  • From: "Alan Scott" <alanne1956@hotmail.com>
• RE: [ATM] New with starters questions
  • From: "Alan Scott" <alanne1956@hotmail.com>
• [ATM] Looking for BBox protocol spec
  • From: AMaroney@sptimes.com
• [ATM] Re: FigureXP and Foucault test Analysis
  • From: Andreas Reifke <andreas.reifke@web.de>
• Re: [ATM] Re: FigureXP and Foucault test Analysis
  • From: Andreas Reifke <andreas.reifke@web.de>
• Re: [ATM] Telescope direct drive
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Ceramic mirrors, fusing Pyrex to the ceramic
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Telescope direct drive
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• [ATM] Re: ATM Digest, Vol 16, Issue 25
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re[11]: [ATM] Use of bearings in (static) mirror cells
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re[12]: [ATM] Use of bearings in (static) mirror cells
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] scatterplate
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "at making" <atmaking@hotmail.com>
• [ATM] FW: Making another scope. GPD, Glass Pushers Disease.
  • From: "Bill Hollenbach" <wjh1@absamail.co.za>
• Re: [ATM] Intentional astigmatism
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] scatterplate
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] scatterplate
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] Howard Moore ATM estate
  • From: "Bill Kelley" <flex@commspeed.net>
• [ATM] Out tonight
  • From: Bob Liesenfeld <wb0poq@visi.com>
• Re: [ATM] Question About Dobsonian Design
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Which tool for a 14 inch blank ?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Wooden truss tubes
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Wooden Truss "Tubes"
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] undercoating for the inside of telescope tubes?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Help needed with foucault
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] RossNullXP, a new program based on an old program
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] RossNullXP, a new program based on an old program
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Bob May" <bobmay@nethere.com>
• Re: Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: "Bob May" <bobmay@nethere.com>
• Re: Re[2]: [ATM] Use of bearings in (static) mirror cells
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] side obstruction
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] re: supplies
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] couder cassegrain
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] scatterplate
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Wind resistance & golf balls
  • From: "Bradley Davy" <bdavy92960@msn.com>
• [ATM] Making Carbon Fibre Tubes
  • From: Bruce MacDonald <brumac@gmail.com>
• Re: [ATM] Carbon Fiber for Spider Vanes
  • From: Bruce MacDonald <brumac@gmail.com>
• Re: [ATM] Storm?
  • From: C Broward <cbroward@ufl.edu>
• RE: [ATM] Wooden truss tubes
  • From: "c f" <quantemlp@hotmail.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Cary Chleborad" <Cary@Chleborads.com>
• RE: [ATM] 25" mirror possibilities (Chapter 2)
  • From: "Cary Chleborad" <Cary@Chleborads.com>
• [ATM] Zulu files
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• [ATM] Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: COO <coo_mo@yahoo.com>
• [ATM] Re: Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: COO <coo_mo@yahoo.com>
• Re: [ATM] Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: COO <coo_mo@yahoo.com>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: Dale Eason <atmpob@yahoo.com>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Mirror Cell for 16x1 mirror
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Tooling Up For Carbon Fiber
  • From: Dan Indrigo <dindrigo@rogers.com>
• Re: [ATM] Alan Scott's Deep Space telescope
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Alan Scott's Deep Space telescope
  • From: Daniel Fundo <fundo@bellsouth.net>
• [ATM] Re: mirror blanks
  • From: David <vorblesnak@peak.org>
• RE: [ATM] Tooling Up For Carbon Fiber
  • From: "David Grennan" <dave@webtreatz.com>
• Re: [ATM] Use of bearings in (satatic) mirror cells
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Wrong head in message reply!
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Mirror alignment?
  • From: "David Harbour" <scarab2@cox.net>
• Re: Re[2]: [ATM] Use of bearings in (satatic) mirror cells
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Wrong head in message reply!
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Mirror alignment?
  • From: "David Harbour" <scarab2@cox.net>
• Fw: [ATM] Wrong Richard- I stay wooden -headed!
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Wrong head in message reply! (and RTV lap moulds)
  • From: "David Harbour" <scarab2@cox.net>
• Re: Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] Misundedrstanding- language (grammar)
  • From: "David Harbour" <scarab2@cox.net>
• Re: Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] Re: Lining up the STARS and Optical alignment
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Misundedrstanding- language (grammar)
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Re: 1- Astatic Mirror Cells (Was:Re: Use of bearingsin(static) mirror cells)
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] Re: DAVE'S BACK! You scoundrel
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Hale and Ritchey
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Re: DAVE'S BACK! You scoundrel
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Re: DAVE'S BACK! You scoundrel
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Re: Lining up the STARS and Optical alignment
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Re: Zulu laps (for figuring)
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Re: Lining up the STARS and Optical alignment
  • From: "David Harbour" <scarab2@cox.net>
• Re: Re[2]: [ATM] Re: Stiction when one upchucks (and Zulu figuring)
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] ATM: HTML emails-
  • From: "David Harbour" <scarab2@cox.net>
• Re: Miracle Zulu laps (was RE: [ATM] Re: Lining up the STARS andOptical alignment)
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] Re: ATM: Fw: Some Basics-
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] couder cassegrain
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Starlaps (aka petal, deformed, Zulu laps)
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] ATM: Whimsical, capricious nature of paraboloid (figuring it)
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Re: DAVE'S BACK! You scoundrel
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] Re: zulu laps,figuring ,etc.....
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] ATM: "Fat Download"
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Sir Richard, his contact and response....
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Sir Richard, his contact and response....
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Sir Richard, his contact and response....
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Storm?
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] Re: Mirror Figuring Docs
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] Gordon Tulloch's web page (optical bench)
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] ATM: Apology to James P Abercrombie for oversight-
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] ATM: James's zip file-
  • From: "David Harbour" <scarab2@cox.net>
• [ATM] ATM: Secret for you-
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] ATM: James's zip file-
  • From: "David Harbour" <scarab2@cox.net>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: "David O. Trevino" <david.trevino@byu.edu>
• Re: [ATM] Field derotator
  • From: David Whysong <dwhysong@gmail.com>
• [ATM] 25" mirror possibilities (Chapter 2)
  • From: dmikk2@netscape.net
• RE:[ATM] 25" mirror possibilities (Chapter 2)
  • From: dmikk2@netscape.net
• Re: [ATM] Wind resistance & golf balls
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Field derotator
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Field derotator
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Field derotator
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Field derotator
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Field derotator
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Telescope direct drive
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Telescope direct drive
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Telescope direct drive
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Misundedrstanding- language (grammar)
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Sir Richard, his contact and response....
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Storm?
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: Re: [ATM] Storm?
  • From: "Don Clement" <clement.focuser@verizon.net>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Tooling Up For Carbon Fiber
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Tooling Up For Carbon Fiber
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Hale and Ritchey
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Hale and Ritchey
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] Foucault Test Analysis Question
  • From: "Douglas Arion" <darion@carthage.edu>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: Douglas S Angle <Douglas.S.Angle@can.dupont.com>
• [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• [ATM] Alan Scott's Deep Space telescope
  • From: DrewClan@aol.com
• [ATM] Fiberglass Tube Fabrication
  • From: "eheiny" <eheiny@yahoo.com>
• [ATM] RE: Making Composite Parts and Telescope Tubes
  • From: "eheiny" <eheiny@yahoo.com>
• Re: Roddier Cell Measuring (Was: [ATM] Use of bearings in
  • From: "eheiny" <eheiny@yahoo.com>
• [ATM] re: supplies
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] Which tool for a 14 inch blank ?
  • From: Eric Royer <eroyer-liste@9online.fr>
• Re: [ATM] Which tool for a 14 inch blank ?
  • From: Eric Royer <eroyer-liste@9online.fr>
• [ATM] couder cassegrain
  • From: Eric Torraca <eric.torraca@gmail.com>
• [ATM] New with starters questions
  • From: "frog3@freeler.nl" <frog3@freeler.nl>
• Re: [ATM] New with starters questions
  • From: "frog3@freeler.nl" <frog3@freeler.nl>
• Re: [ATM] New with starters questions
  • From: "frog3@freeler.nl" <frog3@freeler.nl>
• Re: [ATM] undercoating for the inside of telescope tubes?
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Wooden truss tubes
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Cheap glass blanks
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Re: DAVE'S BACK! You scoundrel
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Hale and Ritchey
  • From: George Anderson <tillerman1@videotron.ca>
• [ATM] ATM Edmund secondary mirrors - worth it?
  • From: Gil McFarlane <gilboastro@yahoo.com>
• [ATM] Flex mirror glue source, glue idea + secondary mirror choice
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] Field derotator
  • From: "Greg Jones" <gregj888@comcast.net>
• Re: [ATM] starting grit size
  • From: "Greg Jones" <gregj888@comcast.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Gregg Swanson" <gswanson@microsoft.com>
• Re: [ATM] Field derotator
  • From: gregj888@comcast.net
• [ATM] BK7 glass
  • From: gregj888@comcast.net
• [ATM] Fwd: Re: my ota Foolish new guy!
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• RE: [ATM] Alan Scott's Deep Space telescope
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Wooden Truss "Tubes"
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Wooden Truss "Tubes"
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] undercoating for the inside of telescope tubes?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] almost heaven star party ATM workshop
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] invention of spectrohelioscope
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Misundedrstanding- language (grammar)
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Putting digital setting circles on a massive existing mount
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• RE: [ATM] Re: ATM Roddier Cell Measuring
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Fwd: [capitalastronomers] completed mirror figuring
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] grinding supplies
  • From: Hugues.Laroche@ses-astra.com
• [ATM] Re: ATM Roddier Cell Measuring
  • From: Hugues.Laroche@ses-astra.com
• RE: [ATM] Re: ATM Roddier Cell Measuring
  • From: Hugues.Laroche@ses-astra.com
• [ATM] Storm?
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• Re: [ATM] Re: FigureXP and Foucault test Analysis
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: Re[2]: [ATM] A two way null test for convex hyperboloids
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Re: FigureXP and Foucault test Analysis
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] RossNullXP, a new program based on an old program
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] RossNullXP, a new program based on an old program
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] fabricating carbon fibre parts.
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• [ATM] Wooden Truss "Tubes"
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] Wooden truss tubes
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] RE: [atm_free] zone one challenge
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Help needed with foucault
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] New with starters questions
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] side obstruction
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: Re[2]: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Low altitude dob
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: "Jerry" <wa4guu@verizon.net>
• RE: Re: [ATM] Storm?
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: Re[6]: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Tooling Up For Carbon Fiber
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] Re: FigureXP and Foucault test Analysis
  • From: Jim Burrows <burrjaw@earthlink.net>
• [ATM] Starlaps (aka petal, deformed, Zulu laps)
  • From: Jim Burrows <burrjaw@earthlink.net>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: John Lynch <john_lynch2005@yahoo.com>
• [ATM] Kenneth Novak
  • From: John Lynch <john_lynch2005@yahoo.com>
• [ATM] Norman Edmund
  • From: John Lynch <john_lynch2005@yahoo.com>
• [ATM] slit, spot, LWT
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "john sherman" <atm@mail.johnspics.com>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] Field derotator
  • From: Jonathan Lavoie <atm@lavoielactee.net>
• [ATM] starting grit size
  • From: "Jonathan Lavoie" <atm@lavoielactee.net>
• Re: [ATM] starting grit size
  • From: Jonathan Lavoie <atm@lavoielactee.net>
• [ATM] side obstruction
  • From: "Jonathan Lavoie" <atm@lavoielactee.net>
• Re: [ATM] side obstruction
  • From: "Jonathan Lavoie" <atm@lavoielactee.net>
• [ATM] field curvature
  • From: "Jonathan Lavoie" <atm@lavoielactee.net>
• [ATM] BK7 glass
  • From: "Jonathan Lavoie" <atm@lavoielactee.net>
• [ATM] BK7 Glass
  • From: "Jonathan Lavoie" <atm@lavoielactee.net>
• Re: [ATM] Which tool for a 14 inch blank ?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] RossNullXP, a new program based on an old program
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Gymbal mounted mirror and stress
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] BK7 Glass
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] New with starters questions
  • From: Ken Lowther <hermit@outofoptions.org>
• RE: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] ATM List server question
  • From: Ken Lowther <hermit@outofoptions.org>
• [ATM] secondary server crash
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Wind resistance & golf cylinders
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: [ATM] A model of the Hindle Sphere test of a convex Hyperboloid
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: [ATM] A model of the Hindle Sphere test of a convex Hyperboloid 2
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• [ATM] Intentional astigmatism
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• Re: [ATM] New with starters questions
  • From: Kevin Whitefire <chaosopher23@yahoo.com>
• RE: [atm_free] and [ATM] zone one challenge
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• [ATM] zone one profiles
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• [ATM] "animated" zone one simulation
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] "animated" zone one simulation
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] side obstruction
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] side obstruction
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] side obstruction
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] side obstruction
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• RE: [ATM] Use of bearings in (static) mirror cells
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• [ATM] Re: Question About Dobsonian Design
  • From: "Lee Buse" <lcbuse@comcast.net>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• [ATM] Full slit Foucault or the inverse wire test
  • From: "Marc J. Sibilia" <msibilia@ailr.com>
• [ATM] fabricating carbon fibre parts.
  • From: "Mark" <marco.miglionico@btinternet.com>
• Re: [ATM] Wind resistance & golf balls
  • From: Mark Holm <mdholm@telerama.com>
• RE: [ATM] Alan Scott's Deep Space telescope
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Intentional astigmatism
  • From: Mark Holm <mdholm@telerama.com>
• RE: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Re: Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: Mark Holm <mdholm@telerama.com>
• RE: [ATM] FW: Making another scope. GPD, Glass Pushers Disease.
  • From: "Martin Lyons" <mlyons@iafrica.com>
• [ATM] Maksutov Cassegrain with Subaperture Corrector References ?
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Maksutov Cassegrain with Subaperture Corrector References ?
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Making Carbon Fibre Tubes
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Telescope direct drive
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Re: [ATM] Telescope direct drive
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Wooden Truss "Tubes"
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Re[2]: [ATM] Use of bearings in (static) mirror cells
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Re[6]: [ATM] Use of bearings in (static) mirror cells
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Re[8]: [ATM] Use of bearings in (static) mirror cells
  • From: "matt" <electro_optic@bellsouth.net>
• [ATM] Re: 1- Astatic Mirror Cells (Was:Re: Use of bearings in(static) mirror cells)
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Roddier Cell Measuring (Was: [ATM] Use of bearings in (static)mirror cells)
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Roddier Cell Measuring (Was: [ATM] Use of bearings in(static)mirror cells)
  • From: "matt" <electro_optic@bellsouth.net>
• Re: Roddier Cell Measuring (Was: [ATM] Use of bearingsin(static)mirror cells)
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Constraints on design
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Constraints on design
  • From: "matt" <electro_optic@bellsouth.net>
• Fwd: Re: [ATM] Telescope direct drive
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• [ATM] A two way null test for convex hyperboloids
  • From: Mauritz Andersson <mauritz.andersson@gmail.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Mauritz Andersson <mauritz.andersson@gmail.com>
• Re: Re[2]: [ATM] A two way null test for convex hyperboloids
  • From: Mauritz Andersson <mauritz.andersson@gmail.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Mauritz Andersson <mauritz.andersson@gmail.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Mauritz Andersson <mauritz.andersson@gmail.com>
• Re: Re[4]: [ATM] A two way null test for convex hyperboloids
  • From: Mauritz Andersson <mauritz.andersson@gmail.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Mauritz Andersson <mauritz.andersson@gmail.com>
• RE: [ATM] Alan Scott's Deep Space telescope
  • From: "mbyorick" <mbyorick@starband.net>
• Re: [ATM] Wind resistance & golf balls
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Field derotator
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Question About Dobsonian Design
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Field derotator
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Field derotator
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Which tool for a 14 inch blank ?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Telescope direct drive
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Wooden Truss "Tubes"
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [atm_free] and [ATM] zone one challenge
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] "animated" zone one simulation
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Maksutov Cassegrain with Subaperture Corrector References ?
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Re: FigureXP and Foucault test Analysis
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: Roddier Cell Measuring (Was: [ATM] Use of bearings in(static) mirror cells)
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: Roddier Cell Measuring (Was: [ATM] Use of bearingsin(static) mirror cells)
  • From: Michael Peck <mpeck1@ix.netcom.com>
• [ATM] Re: Roddier Cell Measuring
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Re: Roddier Cell Measuring
  • From: Michael Peck <mpeck1@ix.netcom.com>
• [ATM] Tools for advanced interferogram analysis
  • From: Michael Peck <mpeck1@ix.netcom.com>
• [ATM] Question About Dobsonian Design
  • From: "Michael Wolfson" <m_wolfson@rogers.com>
• Re: [ATM] Which tool for a 14 inch blank ?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Scope elevation, my 12.5" Cass.
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Two Cassegrains
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Re: DAVE'S BACK! You scoundrel
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Foucault Test Analysis Question
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: Roddier Cell Measuring (Was: [ATM] Use of bearings in (static)mirror cells)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Re: Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: Mike Shuken <mikeshuken@value.net>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: Mike Shuken <mikeshuken@value.net>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: Mike Shuken <mikeshuken@value.net>
• Re: [ATM] Fiberglass Tube Fabrication
  • From: NGC704@aol.com
• Re: [ATM] Fiberglass Tube Fabrication
  • From: NGC704@aol.com
• Re: [ATM] Re: DAVE'S BACK! You scoundrel
  • From: NGC704@aol.com
• Re: [ATM] zone challenge
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] RE: Carbon Fibre tubes
  • From: ntent <ntent@pctcnet.net>
• [ATM] RE: Wooden Truss Tubes
  • From: ntent <ntent@pctcnet.net>
• [ATM] Help needed with foucault
  • From: "Oliver Kersten" <oeli@comesso.de>
• RE: [ATM] Help needed with foucault
  • From: "Oliver Kersten" <oeli@comesso.de>
• Re: [ATM] Telescope direct drive
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• [ATM] Use of bearings in (static) mirror cells
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• [ATM] Importance of balancing mirror cell parts?
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• Re: Re[2]: [ATM] Use of bearings in (static) mirror cells
  • From: "Olivier Biot" <olivier.biot@versateladsl.be>
• Re: [ATM] Re:Cheap glass blanks (Russell Jocoy)
  • From: Pete <lenses@adelphia.net>
• [ATM] Carbon Fiber for Spider Vanes
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] 25" mirror possibilities (Chapter 2)
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Peter" <peter@kitgear.com>
• [ATM] Test
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: "Peter" <peter@kitgear.com>
• [ATM] Making Composite Parts and Telescope Tubes
  • From: "Peter" <peter@kitgear.com>
• Re[2]: [ATM] A model of the Hindle Sphere test of a convex Hyperboloid
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Which tool for a 14 inch blank ?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Maksutov Cassegrain with Subaperture Corrector References ?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] A two way null test for convex hyperboloids
  • From: Richard <cnc@cncservo.co.uk>
• Re[4]: [ATM] A two way null test for convex hyperboloids
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Hello list, some basic question for a new Dobsonian builder
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Hello list,some basic question for a new Dobsonian builder
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Hello list,some basic question for a new Dobsonian builder
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Use of bearings in (satatic) mirror cells
  • From: Richard <cnc@cncservo.co.uk>
• Re[4]: [ATM] Use of bearings in (satatic) mirror cells
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Wrong head in message reply!
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Use of bearings in (static) mirror cells
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Use of bearings in (static) mirror cells
  • From: Richard <cnc@cncservo.co.uk>
• Re[10]: [ATM] Use of bearings in (static) mirror cells
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] field curvature
  • From: Richard <cnc@cncservo.co.uk>
• [ATM] ATM List server question
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] ATM List server question
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Re: Lining up the STARS and Optical alignment
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] ATM: Whimsical,capricious nature of paraboloid (figuring it)
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Use of bearings in (static) mirror cells
  • From: Richard <cnc@cncservo.co.uk>
• Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Re: Roddier Cell Measuring
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Re: Roddier Cell Measuring
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Constraints on design
  • From: Richard <cnc@cncservo.co.uk>
• Re[2]: [ATM] Constraints on design
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] ATM: James's zip file-
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] A two way null test for convex hyperboloids
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] GeeWyld Tool User Manual
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] BK7 glass
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Constraints on design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Constraints on design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Constraints on design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Constraints on design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Constraints on design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Constraints on design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• RE: [ATM] Wind resistance & golf balls
  • From: "Richard Klappal" <klappal@xnet.com>
• Re: [ATM] Which tool for a 14 inch blank ?
  • From: Richard Ozer <rozer@pacbell.net>
• Re: [ATM] Wooden truss tubes
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Help needed with foucault
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Which tool for a 14 inch blank ?
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] 25" mirror possibilities (Chapter 2)
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] RossNullXP, a new program based on an old program
  • From: "Richard Schwartz" <richas@earthlink.net>
• [ATM] Hale and Ritchey
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] ATM: Whimsical,capricious nature of paraboloid (figuring it)
  • From: Rick M <optical_stargazer@yahoo.com>
• RE: [ATM] Putting digital setting circles on a massive existing mount
  • From: "Robert Haler" <bhaler@lymax.com>
• Re: [ATM] Wooden Truss "Tubes"
  • From: "Robert Scholtz" <rscholtz01@comcast.net>
• Re: [ATM] Scope elevation, my 12.5" Cass.
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• Re: [ATM] Carbon Fiber for Spider Vanes
  • From: "Rod Shea" <RodShea@comcast.net>
• Re: [ATM] Carbon Fiber for Spider Vanes
  • From: "Rod Shea" <RodShea@comcast.net>
• [ATM] Tooling Up For Carbon Fiber
  • From: "Rod Shea" <RodShea@comcast.net>
• Re: Re[8]: [ATM] Use of bearings in (static) mirror cells
  • From: "Roger Chisholm-Batten" <rogecb@tiscali.co.uk>
• [ATM] CRAIG'S FUSION ATTEMPT.
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Cheap glass blanks
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Lining up the STARS and Optical alignment
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Sir Richard, his contact and response....
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Off topic, Objects in the Sky
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• Re: [ATM] Intentional astigmatism
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] New with starters questions
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• RE: [atm_free] and [ATM] zone one challenge
  • From: "Scott Milligan" <starzkey@charter.net>
• RE: [ATM] Re: ATM Roddier Cell Measuring
  • From: "Scott Milligan" <starzkey@charter.net>
• RE: [ATM] Re: ATM Roddier Cell Measuring
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Which tool for a 14 inch blank ?
  • From: "Stathis Kafalis" <info@stathis-firstlight.de>
• Re: [ATM] Foucault Test Analysis Question
  • From: "Stathis Kafalis" <info@stathis-firstlight.de>
• Re: [ATM] Figuring Help Request: 6" F7 - Which Stroke Next?
  • From: "Stathis Kafalis" <info@stathis-firstlight.de>
• [ATM] Mirror alignment?
  • From: "Tax Payer" <taxpayer779@hotmail.com>
• RE: [ATM] Fwd: Re: my ota Foolish new guy!
  • From: "Thomas" <tomjan@ozemail.com.au>
• [ATM] Have the first stage of my website's update/rebuild done!
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Carbon Fiber for Spider Vanes
  • From: Thomas A Simmons <tasimmons@raytheon.com>
• Re: Fw: [ATM] Wrong Richard- I stay wooden -headed!
  • From: "Thomas A. Moulton" <tom@moulton.us>
• RE: Re: [ATM] Storm?
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Use of bearings in (static) mirror cells
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Re: ATM Digest, Vol 16, Issue 25
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: Re[4]: [ATM] Use of bearings in (static) mirror cells
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: Re[6]: [ATM] Use of bearings in (static) mirror cells
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] zone one challenge
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Gregorian anastigmatic aplant for imaging
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Single mirror flat-field aplant
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Single mirror flat-field aplant
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] ATM Edmund secondary mirrors - worth it?
  • From: "vladimir sacek" <vlad@copper.net>
• Re: [ATM] Constraints on design
  • From: "vladimir sacek" <vlad@copper.net>
• [ATM] Ceramic mirrors, fusing Pyrex to the ceramic
  • From: vorblesnak@peak.org
• Re: [ATM] Wooden Truss "Tubes"
  • From: vorblesnak@peak.org
• [ATM] Re:Cheap glass blanks (Russell Jocoy)
  • From: vorblesnak@peak.org
• [ATM] Ultra Thin slumped mirrors
  • From: vorblesnak@peak.org
• Re: [ATM] side obstruction
  • From: William Chang <williamichang@yahoo.com>
• Re: [ATM] side obstruction
  • From: William Chang <williamichang@yahoo.com>
• Re: [ATM] Mirror alignment?
  • From: Wouter van Reeven <wouter@van.reeven.nl>