[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] split-ring

To: atm@atmlist.net
Subject: [ATM] split-ring
From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
Date: Thu, 29 Apr 2004 07:24:45 -0400
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net


    Greg,
    Are you going to install this strip over wood?If so how thick is the 
stainless to be,and how wide? Do you plan to route the wood prior to 
installation?That is providing you use wood.
regards,Ron

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] split-ring
  - From: "Greg Nuspel" <nuspel@telusplanet.net>

Prev by Author: [ATM] trepanning tools
Next by Author: [ATM] alum split-ring
Prev by thread: [ATM] Re: Source to cut and curve generate refractor blanks.
Next by thread: Re: [ATM] split-ring
Index(es):
- Author
- Thread