[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: [ATM] Going price for a fine annealed 24" pyrex blank

To: <atm@atmlist.net>
Subject: RE: [ATM] Going price for a fine annealed 24" pyrex blank
From: "mbyorick" <mbyorick@starband.net>
Date: Wed, 21 Apr 2004 09:56:49 -0600
Importance: Normal
In-Reply-To: <000e01c4273f$3616bfe0$ff67fea9@ev1.net>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

I bought a 24" x 1 7/8" Pyrex blank from Newport Glass last year - $930
(with Blanchard-ground back), + $90 for a pre-generated curve.
'Commercial' annealed, rather than 'fine' annealed (although I'm not
sure what's actually to be gained from 'fine' annealing).  It was a
'custom' blank, but it doesn't appear that this caused any significant
increase in the price.

Cheers,
Mike Byorick
SW New Mexico

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Going price for a fine annealed 24" pyrex blank
  - From: "Jerry B. Hillman" <JBHillman@ev1.net>

Prev by Author: [ATM] WANTED: Custom Aluminum Tube
Next by Author: [ATM] RE: 'Commercial' annealed, rather than 'fine' annealed
Prev by thread: Re: [ATM] Going price for a fine annealed 24" pyrex blank
Next by thread: Re: [ATM] Going price for a fine annealed 24" pyrex blank
Index(es):
- Author
- Thread