[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: [ATM] Information on making Star Laps

To: "'atm@atmlist.net'" <atm@atmlist.net>
Subject: RE: [ATM] Information on making Star Laps
From: "Krajci, Thomas J" <KrajciTJ@state.gov>
Date: Wed, 21 Apr 2004 17:13:01 +0500
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

>From: "Robert Turner" <rbturner@charter.net>

>Where can I find some good information on correctly making star or rose
l>aps? Is there a rule of how many points and how big to make the center
>area?

See:  http://overton.tamu.edu/aset/krajci
Specifically:  
http://overton.tamu.edu/aset/krajci/star-lap/star-lap.htm

Many variables at play...hard to recommend any one technique/approach.

I hope this helps.

Tom Krajci
Tashkent, Uzbekistan

_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: Re: [ATM] Source for Dental Stone
Next by Author: [ATM] First mirror help
Prev by thread: Re: [ATM] Information on making Star Laps
Next by thread: [ATM] keeping it straight
Index(es):
- Author
- Thread