[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] Machine Polishing

To: <atm@atmlist.net>
Subject: [ATM] Machine Polishing
From: "aneves" <aneves@snowsoft.biz>
Date: Sun, 18 Apr 2004 13:07:17 -0400
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Reply-To: aneves@snowsoft.biz
Sender: atm-bounces@atmlist.net

Hi,

What is the correct way to spherical polish a mirror on a machine with a sub diameter tool. Every method I try I end up with a hole in the middle! Could some of your more experienced on machines give me some hints! How do the pros do it? I am sure they must be able to pull 
a perfect sphere on a machine.

I am doing an 8" with a 6" tool, 2" stroke offset by 2" to the right.

Regards,

Alfredo

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Machine Polishing
  - From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
- Re: [ATM] Machine Polishing
  - From: Michael Lindner <mikell@optonline.net>

Prev by Author: [ATM] Flat Testing
Next by Author: [ATM] Ronchi Confusion
Prev by thread: Re: [ATM] machine hogging
Next by thread: Re: [ATM] Machine Polishing
Index(es):
- Author
- Thread