[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Types of aluminum

To: <atm@atmlist.net>
Subject: Re: [ATM] Types of aluminum
From: "Donald \"Don\" Ware" <mimas@charter.net>
Date: Thu, 15 Apr 2004 21:53:29 -0400
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <20040416012446.48722.qmail@web13125.mail.yahoo.com>
Sender: atm-bounces@atmlist.net


----- Original Message ----- 
From: "John Lynch" <john_p_lynch2004@yahoo.com>

> I've consistently used T6061, which is a good workable
> aluminum alloy.  It can be drilled and tapped easily,
> machined, and hand-filed to just about any shape you
> want.  Also, it's pretty inexpensive but the per pound
> cost I don't know off hand.

T6061 aluminum is commonly available from scrape metal yards.  In the
Southern New Hampshire/Northern Massachusetts area it goes for $1.00 to
$1.50 per pound.

Don Ware
Hollis, NH
http://webpages.charter.net/dware1/



_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Types of aluminum
  - From: John Lynch <john_p_lynch2004@yahoo.com>

Prev by Author: Re: [ATM] Source for Dental Stone
Next by Author: Re: [ATM] Types of aluminum
Prev by thread: Re: [ATM] Types of aluminum
Next by thread: Re: [ATM] Types of aluminum
Index(es):
- Author
- Thread