Amateur Telescope Makers (ATM) Archive for APR04 - by author

• Thread Index

• Re: [ATM] History of moving mirrors for Schmidt Cassegrains.
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] History of moving mirrors for Schmidt Cassegrains.
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] History of moving mirrors for Schmidt Cassegrains.
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Split ring bearing surface
  • From: Andy Saulietis <iss@pvtnetworks.net>
• [ATM] Flat Testing
  • From: "aneves" <aneves@snowsoft.biz>
• [ATM] Machine Polishing
  • From: "aneves" <aneves@snowsoft.biz>
• [ATM] Ronchi Confusion
  • From: artbianconi@blast.net
• [ATM] Couder Masks and Zone Testing
  • From: artbianconi@blast.net
• [ATM] PVC fitting mirror-cell.
  • From: artbianconi@blast.net
• [ATM] Camera recommendations?
  • From: artbianconi@blast.net
• [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: artbianconi@blast.net
• [ATM] "Do it Yourself" 'fine' annealing
  • From: artbianconi@blast.net
• [ATM] Does exposed Pyrex lose polish over time?
  • From: artbianconi@blast.net
• [ATM] Re: ATM Digest, Vol 4, Issue 8
  • From: artbianconii@blast.net
• RE: [ATM] alum split-ring
  • From: "ATM_Wes" <atm_wes@sbcglobal.net>
• RE: [ATM] Large Pyrex sheets and polishing machines available
  • From: Barry Keeney <barryk@chaoscon.com>
• Re: [ATM] Source for Dental Stone
  • From: bchilders@everestkc.net
• [ATM] Older Edmund Scientific Objective Lens
  • From: "Bill & Becky" <wmarvin@hickorytech.net>
• [ATM] Mount Question
  • From: "Bill & Becky" <wmarvin@hickorytech.net>
• Re: [ATM] SK14 Glass
  • From: Bill Marriott <bmarriott@pacbell.net>
• [ATM] Does exposed Pyrex lose polish over time?
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: [ATM] Grinding Machine Mishap!
  • From: Bob <pabob@primus.com.au>
• Re: [ATM] ATM chinese puzzler
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Edging a Blank
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Bk7 and F4 cost
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] ATM chinese puzzler
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] First mirror help
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Extended Object Brightness
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Source for Dental Stone
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] First mirror help
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Source for Dental Stone
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] SK14 Glass
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Source for Dental Stone
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] History of moving mirrors for Schmidt Cassegrains.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] fast lurie-houghtons
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Couder Masks and Zone Testing
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Types of aluminum
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Hand held testing & Nixon's comming
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] AlumaWeld / AlumAloy
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Flat Testing
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] 5.3 kg Cu3Sn Protection
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] plaster tools or something like it
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Achromatic Doublet Design Help
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Re: Couder Masks and Zone Testing
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Achromatic Doublet Design Help
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Re: ATM A new kind of folded Newtonian
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Pitch Lap / two way
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] homemade diagonal
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Grinding Machine Mishap!
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] star testing uncoated mirrors, and trepannind secondary.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] First Light on First Mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] star testing uncoated mirrors, and trepannind secondary.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Source to cut and curve generate refractor blanks.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Flat Tester
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Does exposed Pyrex lose polish over time?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] diagonal flat testing
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] Field size
  • From: "Bob Nonnemann" <bob.nonnemann@insightbb.com>
• Re: [ATM] Edging a Blank
  • From: buck childers <bchilders@everestkc.net>
• Re: [ATM] Source for Dental Stone
  • From: buck childers <bchilders@everestkc.net>
• Re: [ATM] Types of aluminum
  • From: buck childers <bchilders@everestkc.net>
• Re: [ATM] Ronchi Confusion
  • From: buck childers <bchilders@everestkc.net>
• Re: [ATM] homemade diagonal
  • From: buck childers <bchilders@everestkc.net>
• [ATM] Couder Masks and Zone Testing
  • From: "Byron" <byron@astronomygeek.us>
• Re: [ATM] Couder Masks and Zone Testing
  • From: "Byron" <byron@astronomygeek.us>
• Re: [ATM] Couder Masks and Zone Testing
  • From: "Byron" <byron@astronomygeek.us>
• [ATM] Re: Couder Masks and Zone Testing
  • From: "Byron" <byron@astronomygeek.us>
• [ATM] hole?
  • From: "c f" <quantemlp@hotmail.com>
• [ATM] re edge grinding
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• Re: [ATM] PVC fitting mirror-cell.
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• Re: [ATM] Grinding Machine Mishap!
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• [ATM] re: Going price for a fine annealed 24" blank
  • From: Chris Plicht <cap@plicht.de>
• Re: [ATM] homemade diagonal
  • From: Chris Plicht <cap@plicht.de>
• Re: [ATM] PVC fitting mirror-cell.
  • From: "Chris Rowland" <chris_group_mail@dsl.pipex.com>
• [ATM] (no subject)
  • From: "Chuck" <cscappaticci@adelphia.net>
• [ATM] SK14 Glass
  • From: "Chuck" <cscappaticci@adelphia.net>
• [ATM] Going price for a fine annealed 24" pyrex blank
  • From: "Chuck" <cscappaticci@adelphia.net>
• Re: [ATM] 5.3 kg Cu3Sn Protection
  • From: "Colton" <clnoble@email.arizona.edu>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Ronchi Confusion
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] diagonal flat testing
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Source for Dental Stone
  • From: "Dan & Barb" <sunshine92@insightbb.com>
• Re: [ATM] Extended Object Brightness
  • From: Dan Croskrey <dan@croskrey.net>
• Re: [ATM] Source for Dental Stone
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Going price for a fine annealed 24" pyrex blank
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Split ring bearing surface
  • From: Daniel Fundo <fundo@bellsouth.net>
• [ATM] Extended Object Brightness
  • From: Daniel Reinders <danreind@shaw.ca>
• Re: [ATM] Extended Object Brightness
  • From: Daniel Reinders <danreind@shaw.ca>
• Re: [ATM] Extended Object Brightness
  • From: Daniel Reinders <danreind@shaw.ca>
• [ATM] PVC fitting mirror-cell.
  • From: "Danny F. Barnes" <dannybarnes@sbcglobal.net>
• Re: [ATM] PVC fitting mirror-cell.
  • From: "Danny F. Barnes" <dannybarnes@sbcglobal.net>
• Re: [ATM] Does glass retain moisture?
  • From: David Whysong <dwhysong@physics.ucsb.edu>
• Re: [ATM] Does glass retain moisture?
  • From: David Whysong <dwhysong@physics.ucsb.edu>
• Re: [ATM] Extended Object Brightness
  • From: David Whysong <dwhysong@physics.ucsb.edu>
• Re: [ATM] History of moving mirrors for Schmidt Cassegrains.
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Types of aluminum
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Secondary Cage Sizing?
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Dumb Question about interferometers
  • From: "Don Ware" <mimas@charter.net>
• [ATM] Re: ATM chinese puzzler
  • From: "Donald \"Don\" Ware" <mimas@charter.net>
• Re: [ATM] Source for Dental Stone
  • From: "Donald \"Don\" Ware" <mimas@charter.net>
• Re: [ATM] Types of aluminum
  • From: "Donald \"Don\" Ware" <mimas@charter.net>
• Re: [ATM] Types of aluminum
  • From: "Donald \"Don\" Ware" <mimas@charter.net>
• Re: [ATM] Types of aluminum
  • From: "Donald \"Don\" Ware" <mimas@charter.net>
• [ATM] star testing uncoated mirrors, and trepannind secondary.
  • From: Douglas S Angle <Douglas.S.Angle@can.dupont.com>
• RE: [ATM] Large Pyrex sheets and polishing machines available
  • From: "Dwight Henry" <dyloch@defnet.com>
• [ATM] Re: Source to cut and curve generate refractor blanks.
  • From: fabio@voreas.com
• Re: [ATM] Types of aluminum
  • From: gary@rcn.com
• Re: [ATM] Types of aluminum
  • From: gary@rcn.com
• Re: [ATM] Edging a Blank
  • From: Gary Fuchs <gfphoto1@earthlink.net>
• [ATM] Types of aluminum
  • From: "Gary Fuchs" <gary@rcn.com>
• Re: [ATM] History of moving mirrors for Schmidt Cassegrains.
  • From: Gary Seronik <gseronik@netway.com>
• Re: [ATM] Edging a Blank
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] Re: ATM chinese puzzler
  • From: George Anderson <georgea@cam.org>
• [ATM] Edging a Blank
  • From: Gil Gagne <gilgagne@bellsouth.net>
• Re: [ATM] Types of aluminum
  • From: Gil Gagne <gilgagne@bellsouth.net>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Gord Tulloch <gtulloch@shaw.ca>
• Re: [ATM] Does glass retain moisture?
  • From: greg emery <glass_grinder@yahoo.ca>
• [ATM] Split ring bearing surface
  • From: "Greg Nuspel" <nuspel@telusplanet.net>
• Re: [ATM] split-ring
  • From: "Greg Nuspel" <nuspel@telusplanet.net>
• [ATM] Depth of field
  • From: Grey Coyote <greycoyotee@yahoo.com>
• Re: [ATM] machine hogging
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] ATM chinese puzzler
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] ATM chinese puzzler
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Re: ATM chinese puzzler
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] First mirror help
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• RE: [ATM] First mirror help
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] fast lurie-houghtons
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• RE: [ATM] Large Pyrex sheets and polishing machines available
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Flat Testing
  • From: Otterstedt@t-online.de (Heiner Otterstedt)
• Re: [ATM] Focuser Tube
  • From: Hugues.Laroche@ses-astra.com
• Re: [ATM] Flat Testing
  • From: Hugues.Laroche@ses-astra.com
• [ATM] tube-re-build
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] alum oh boy
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] got steel?
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] trepanning
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] trepanning tools
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] split-ring
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] alum split-ring
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] keeping it straight
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] error
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] listing a service
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• Re: [ATM] ATM chinese puzzler
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] Re: Types of Aluminum
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• [ATM] Re Price of 24" blank
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• Re: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: Jan Bentz <jbentz@inreach.com>
• Re: [ATM] Secondary Cage Sizing?
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] homemade diagonal
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Grinding Machine Mishap!
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] uncoated optics testing
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] Focuser Tube
  • From: Jason Stanek <jstanek@iastate.edu>
• Re: [ATM] Going price for a fine annealed 24" pyrex blank
  • From: "Jeff Anderson-Lee" <jonah@cs.berkeley.edu>
• Re: [ATM] trepanning
  • From: "Jeff Anderson-Lee" <jonah@cs.berkeley.edu>
• Re: [ATM] trepanning
  • From: "Jeff Anderson-Lee" <jonah@cs.berkeley.edu>
• Re: [ATM] Does exposed Pyrex lose polish over time?
  • From: "Jeff Anderson-Lee" <jonah@cs.berkeley.edu>
• [ATM] Harmer-Wynne Design
  • From: Jens Moser <jens.moser@sternenphoto.de>
• Re: [ATM] Harmer-Wynne Design
  • From: Jens Moser <jens.moser@sternenphoto.de>
• Re: [ATM] Harmer-Wynne Design
  • From: Jens Moser <jens.moser@sternenphoto.de>
• RE: [ATM] Extended Object Brightness
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Achromatic Doublet Design Help
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Achromatic Doublet Design Help
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Older Edmund Scientific Objective Lens
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Grinding Machine Mishap!
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] PVC fitting mirror-cell.
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] PVC fitting mirror-cell.
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Going price for a fine annealed 24" pyrex blank
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] homemade diagonal
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] homemade diagonal
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] homemade diagonal
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] homemade diagonal
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] star testing uncoated mirrors, and trepannind secondary.
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] Unusual testing flat
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Source to cut and curve generate refractor blanks.
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Large Pyrex sheets and polishing machines available
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Source to cut and curve generate refractor blanks.
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] star testing uncoated mirrors, and trepannind secondary.
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] uncoated optics testing
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] trepanning
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] trepanning
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] diagonal flat testing
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] diagonal flat testing
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] Diffract and webcam Hartmann.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] CELL.EXE?
  • From: "Jim Girard" <argojg@comcast.net>
• Re: [ATM] Source for Dental Stone
  • From: "Jim Girard" <argojg@comcast.net>
• Re: [ATM] Source for Dental Stone
  • From: "Jim Girard" <argojg@comcast.net>
• [ATM] Re: ATM Digest, Vol 4, Issue 23
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: [ATM] Large Pyrex sheets and polishing machines available
  • From: Joe <nss@mwt.net>
• Re: [ATM] Large Pyrex sheets and polishing machines available
  • From: Joe <nss@mwt.net>
• [ATM] trepanning on a 45 degree angle
  • From: Joe Campbell <joe@esper.com>
• Re: [ATM] Types of aluminum
  • From: John Lynch <john_p_lynch2004@yahoo.com>
• Re: [ATM] Does glass retain moisture?
  • From: "john sherman" <atm@mail.johnspics.com>
• [ATM] Ronchi Confusion
  • From: Joseph Celmer <celstar@frontiernet.net>
• Re: [ATM] Extended Object Brightness
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Whiffle Tree cell using 'Swivel Leveling Mounts'?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Whiffle Tree cell using 'Swivel Leveling Mounts'?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] PVC fitting mirror-cell.
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Older Edmund Scientific Objective Lens
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] homemade diagonal
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] homemade diagonal
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] trepanning
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] diagonal flat testing
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Re: OT-Someone spoofing my address
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Edging a Blank
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Supporting thin mirrors for testing
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Edging a Blank
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] ATM chinese puzzler
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Extended Object Brightness
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Extended Object Brightness
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Extended Object Brightness
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] History of moving mirrors for Schmidt Cassegrains.
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Grinding Machine Mishap!
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Grinding Machine Mishap!
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Source to cut and curve generate refractor blanks.
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Source for Dental Stone
  • From: Ken Lowther <hermit@outofoptions.org>
• RE: [ATM] Information on making Star Laps
  • From: "Krajci, Thomas J" <KrajciTJ@state.gov>
• [ATM] First mirror help
  • From: Kurt Clement <kurt.clement@flashmail.com>
• Re: [ATM] PVC fitting mirror-cell.
  • From: Kurt Clement <kurt.clement@flashmail.com>
• [ATM] First Light on First Mirror
  • From: Kurt Clement <kurt.clement@flashmail.com>
• Re: [ATM] Does glass retain moisture?
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• [ATM] History of moving mirrors for Schmidt Cassegrains.
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] 5.3 kg Cu3Sn
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] Types of aluminum
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] Achromatic Doublet Design Help
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• [ATM] CELL.EXE?
  • From: "Lawrence Sayre" <lsayre@neo.rr.com>
• Re: [ATM] CELL.EXE?
  • From: "Lawrence Sayre" <lsayre@neo.rr.com>
• Re: [ATM] Source for Dental Stone
  • From: "Lawrence Sayre" <lsayre@neo.rr.com>
• [ATM] Whiffle Tree cell using 'Swivel Leveling Mounts'?
  • From: "Lawrence Sayre" <lsayre@neo.rr.com>
• [ATM] 5.5" minor axis secondary mirror : source needed
  • From: "Lawrence Sayre" <lsayre@neo.rr.com>
• Re: [ATM] Secondary Cage Sizing?
  • From: "Lawrence Sayre" <lsayre@neo.rr.com>
• Re: [ATM] Secondary Cage Sizing?
  • From: "Lawrence Sayre" <lsayre@neo.rr.com>
• Re: [ATM] 5.5" minor axis secondary mirror : source needed
  • From: "Lawrence Sayre" <lsayre@neo.rr.com>
• Re: [ATM] Ronchi Confusion
  • From: Leftfieldstar@aol.com
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• [ATM] Testing
  • From: "Marco" <marco.pm@btopenworld.com>
• Re: [ATM] Does glass retain moisture?
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Does glass retain moisture?
  • From: Mark Cowan <toolontop@yahoo.com>
• [ATM] Visualizing tube currents
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Does glass retain moisture?
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Edging a Blank
  • From: Mark Cowan <toolontop@yahoo.com>
• [ATM] Supporting thin mirrors for testing
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Supporting thin mirrors for testing
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] ATM chinese puzzler
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Ronchi Confusion
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Going price for a fine annealed 24" pyrex blank
  • From: Mark Cowan <toolontop@yahoo.com>
• RE: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: Mark Cowan <toolontop@yahoo.com>
• RE: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: Mark Cowan <toolontop@yahoo.com>
• RE: [ATM] Large Pyrex sheets and polishing machines available
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Does glass retain moisture?
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Couder Masks and Zone Testing
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Mark Holm <mdholm@telerama.com>
• RE: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Grinding Machine Mishap!
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Dumb Question about interferometers
  • From: Mark Suchting <masuch@cia.com.au>
• [ATM] Large Pyrex sheets and polishing machines available
  • From: Mark Suchting <masuch@cia.com.au>
• Re: [ATM] uncoated optics testing
  • From: Mark Suchting <masuch@cia.com.au>
• Re: [ATM] diagonal flat testing
  • From: Mark Suchting <masuch@cia.com.au>
• Re: [ATM] ATM chinese puzzler
  • From: Marty.T@t-online.de (Martin Trittelvitz)
• [ATM] Re: Split ring bearing surface
  • From: martin.cibulski@t-online.de
• Re: [ATM] Machine Polishing
  • From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
• Fwd: [ATM] New 16 inch with sled focuser website
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• Fwd: RE: [ATM] got steel?
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• Fwd: Re: [ATM] homemade diagonal
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• Fwd: [ATM] Unusual testing flat
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• [ATM] AlumaWeld / AlumAloy
  • From: "MATTHEW SIMMONS" <msimmonsmcse@msn.com>
• RE: [ATM] got steel?
  • From: "MATTHEW SIMMONS" <msimmonsmcse@msn.com>
• Re: [ATM] Types of aluminum
  • From: "MATTHEW SIMMONS" <msimmonsmcse@msn.com>
• [ATM] Secondary Cage Sizing?
  • From: "MATTHEW SIMMONS" <msimmonsmcse@msn.com>
• Re: [ATM] Secondary Cage Sizing?
  • From: "MATTHEW SIMMONS" <msimmonsmcse@msn.com>
• Re: [ATM] Secondary Cage Sizing?
  • From: "MATTHEW SIMMONS" <msimmonsmcse@msn.com>
• [ATM] WANTED: Custom Aluminum Tube
  • From: "MATTHEW SIMMONS" <msimmonsmcse@msn.com>
• RE: [ATM] Going price for a fine annealed 24" pyrex blank
  • From: "mbyorick" <mbyorick@starband.net>
• [ATM] RE: 'Commercial' annealed, rather than 'fine' annealed
  • From: "mbyorick" <mbyorick@starband.net>
• Re: [ATM] Does glass retain moisture?
  • From: mdholm@telerama.com
• [ATM] Simple tests you can do with your telescope
  • From: mdholm@telerama.com
• Re: [ATM] Source for Dental Stone
  • From: mdholm@telerama.com
• [ATM] Re: ATM A new kind of folded Newtonian
  • From: mdholm@telerama.com
• Re: [ATM] Does exposed Pyrex lose polish over time?
  • From: mdholm@telerama.com
• Re: [ATM] diagonal flat testing
  • From: mdholm@telerama.com
• Re: [ATM] Extended Object Brightness
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Crayford focuser pinion problem
  • From: Michael Lindner <mikell@optonline.net>
• [ATM] Edging a Blank
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Edging a Blank
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Edging a Blank
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Edging a Blank
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Source for Dental Stone
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] fast lurie-houghtons
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Machine Polishing
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Secondary Cage Sizing?
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Secondary Cage Sizing?
  • From: Michael Lindner <mikell@optonline.net>
• [ATM] Grinding Machine Mishap!
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Grinding Machine Mishap!
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Dumb Question about interferometers
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Grinding Machine Mishap!
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Flat Tester
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Polishing Diagonal Blank
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Source for Dental Stone
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] ATM chinese puzzler
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] homemade diagonal
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Secondary Cage Sizing?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Fwd: Re: [ATM] Re: OT-Someone spoofing my address
  • From: <nfnik-atmlist2@yahoo.com>
• Re: Fwd: Re: [ATM] Re: OT-Someone spoofing my address
  • From: <nfnik-atmlist2@yahoo.com>
• Re: Fwd: Re: [ATM] Re: OT-Someone spoofing my address
  • From: <nfnik-atmlist2@yahoo.com>
• Re: [ATM] Couder Masks and Zone Testing
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• RE: [ATM] 5.5" minor axis secondary mirror : source needed
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] Depth of field
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Re: ATM chinese puzzler
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] SK14 Glass
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Achromatic Doublet Design Help
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Harmer-Wynne Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Harmer-Wynne Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• RE: [ATM] Does exposed Pyrex lose polish over time?
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] Mount Question
  • From: "Richard Klappal" <klappal@xnet.com>
• Re: [ATM] Extended Object Brightness
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Extended Object Brightness
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Does glass retain moisture?
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] Extended Object Brightness
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] Couder Masks and Zone Testing
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] Couder Masks and Zone Testing
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] Secondary Cage Sizing?
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] Source to cut and curve generate refractor blanks.
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: [ATM] Couder Masks and Zone Testing
  • From: Rick Maillet <bucko_62@yahoo.com>
• RE: [ATM] Edging a Blank
  • From: "Robert Turner" <rbturner@charter.net>
• [ATM] Bk7 and F4 cost
  • From: "Robert Turner" <rbturner@charter.net>
• [ATM] Source for Dental Stone
  • From: "Robert Turner" <rbturner@charter.net>
• [ATM] Achromatic Doublet Design Help
  • From: "Robert Turner" <rbturner@charter.net>
• RE: [ATM] Achromatic Doublet Design Help
  • From: "Robert Turner" <rbturner@charter.net>
• [ATM] Information on making Star Laps
  • From: "Robert Turner" <rbturner@charter.net>
• RE: [ATM] Large Pyrex sheets and polishing machines available
  • From: "Robert Turner" <rbturner@charter.net>
• [ATM] Source to cut and curve generate refractor blanks.
  • From: "Robert Turner" <rbturner@charter.net>
• [ATM] Polishing Diagonal Blank
  • From: "Robert Turner" <rbturner@charter.net>
• [ATM] Flat Tester
  • From: "Robert Turner" <rbturner@charter.net>
• RE: [ATM] Source for Dental Stone
  • From: "Robert Turner" <rbturner@charter.net>
• RE: [ATM] diagonal flat testing
  • From: "Robert Turner" <rbturner@charter.net>
• RE: [ATM] diagonal flat testing
  • From: "Robert Turner" <rbturner@charter.net>
• Re: RE: [ATM] got steel?
  • From: "Roger Chisholm-Batten" <rogecb@tiscali.co.uk>
• [ATM] Anodizing page up dated
  • From: "Ron Newman" <ronaldn@ptd.net>
• Re: [ATM] Whiffle Tree cell using 'Swivel Leveling Mounts'?
  • From: Ross Sackett <rsackett00@yahoo.com>
• [ATM] Hand held testing & Nixon's comming
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Pitch Lap / two way
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Test
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Extended Object Brightness (projection)
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• [ATM] Test
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Secondary Cage Sizing?
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• [ATM] Dumb Question about interferometers
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• [ATM] RE: Older Edmund Scientific Objective Lens (Jerry)
  • From: Starmutt@aol.com
• [ATM] New 16 inch with sled focuser website
  • From: "Stathis Kafalis" <info@stathis-firstlight.de>
• Re: [ATM] PVC fitting mirror-cell.
  • From: "Stephen C. Koehler" <koehler@securecomputing.com>
• [ATM] plaster tools or something like it
  • From: "Steve Davis" <designsdavis@mchsi.com>
• Re: [ATM] Source for Dental Stone
  • From: Steve Goldman <sgoldman@starband.net>
• Re: [ATM] Whiffle Tree cell using 'Swivel Leveling Mounts'?
  • From: "Steve Houlihan" <sho@surfnetUSA.com>
• Re: [ATM] Extended Object Brightness
  • From: "Stuart Hutchins" <stuart452@earthlink.net>
• Re: [ATM] Extended Object Brightness (projection)
  • From: "Stuart Hutchins" <stuart452@earthlink.net>
• Re: [ATM] Large Pyrex sheets and polishing machines available
  • From: "Stuart Hutchins" <stuart452@earthlink.net>
• RE: [ATM] Extended Object Brightness (projection)
  • From: "Thomas" <tomjan@ozemail.com.au>
• FW: [ATM] re: ATM A new kind of folded Newtonian
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Large Pyrex sheets and polishing machines available
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Large Pyrex sheets and polishing machines available
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Large Pyrex sheets and polishing machines available
  • From: "Thomas" <tomjan@ozemail.com.au>
• [ATM] Re: OT-Someone spoofing my address
  • From: Thomas A Simmons <tasimmons@raytheon.com>
• Re: [ATM] Edging a Blank
  • From: Thomas A Simmons <tasimmons@raytheon.com>
• Re: [ATM] Edging a Blank
  • From: Thomas A Simmons <tasimmons@raytheon.com>
• [ATM] Whiffle Tree cell using 'Swivel Leveling Mounts'?
  • From: Thomas A Simmons <tasimmons@Raytheon.com>
• Re: [ATM] CELL.EXE?
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] Extended Object Brightness
  • From: tkrajci@san.osd.mil
• Re: [ATM] Re: OT-Someone spoofing my address
  • From: "Tom Moulton" <tom@moulton.us>
• Re: [ATM] Large Pyrex sheets and polishing machines available
  • From: "Tom Moulton" <tom-keyword-atm2.7444eb@moulton.us>
• [ATM] re: ATM A new kind of folded Newtonian
  • From: "Tony Dunlap" <tdunlap@adelphia.net>
• RE: [ATM] Re: A new kind of folded Newtonian
  • From: "Tony Dunlap" <tdunlap@adelphia.net>
• Re: [ATM] Crayford focuser pinion problem
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• [ATM] Re:Extended Object Brightness
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• Re: [ATM] Information on making Star Laps
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• Re: [ATM] 'Commercial' annealed, rather than 'fine' annealed
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• Re: [ATM] Grinding Machine Mishap!
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• Re: [ATM] trepanning tools
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.tel.hr>
• [ATM] re:field size
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re:Extended object brightness
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re:Extended object brightness
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re:Exrended object brightness
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re:Extended object brightness
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re:Extended object brightness
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re: fast lurie-houghtons
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re: History of moving mirrors for SCT...
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re: A new kind of folded Newtonian
  • From: Vladimir Sacek <vladis.2@juno.com>
• [ATM] Re:A new kind of folded Newtonian
  • From: Vladimir Sacek <vladis.2@juno.com>
• Re: [ATM] machine hogging
  • From: Woodchuck <djv@bedford.net>