Re: ATM Brasswork

[Daniel Fundo <fundo@bellsouth.net>]

<< I have tried cellulose based clear lacquer in a spray can from the
local  motor store but don't find this to be very satisfactory as it is
difficult  to get an even coat and it does'nt seem to last.  Perhaps the
technique is  wrong. Any ideas appreciated. >>

Derek,  I worked on a project several years ago where a lot of brass
work was restored.  I was surprised to find that the restorers used tung
oil to protect the refinished brass.  They thinned it out and put it on
with cotton balls and cotton swabs.  It will enhanse the coloring of the
brass, and can easily be removed when it begins to wear.  The restorers
suggested that the pieces be recoated every 2-3 years, and thoroughly
cleaned every 10-12 years.

*****-----
Dan F.
Secretary/MAS
Memphis, TN