[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

ATM ROTOZIPPPING CIRCLES

To: <atm@shore.net>
Subject: ATM ROTOZIPPPING CIRCLES
From: "Carl Woebcke" <carl7@netzero.net>
Date: Fri, 6 Apr 2001 19:10:06 -0700
Reply-To: "Carl Woebcke" <carl7@netzero.net>
Sender: owner-atm@shore.net


Hello out there,

I'm using a Spiral Saw Rotozip with an 1/8" bit to cut a 30" diameter circle
in 1/2" thick Baltic Birch plywood - BUT, the cut wanders almost 1/8" from
perfectly circular within the first 30 degrees of arc on a test piece.
Everything seems to be tight on the circle guide I've created, so it seems
to be impossible.  Any ideas?

Carl



Shop online without a credit card
http://www.rocketcash.com
RocketCash, a NetZero subsidiary

Follow-Ups:
- Re: ATM ROTOZIPPPING CIRCLES
  - From: "Buddy" <maxwebhead@mindspring.com>
- Re: ATM ROTOZIPPPING CIRCLES
  - From: George Anderson <georgea@CAM.ORG>
- RE: ATM ROTOZIPPPING CIRCLES
  - From: "Ken Bertapelle" <kenb@cqg.com>
- Re: ATM ROTOZIPPPING CIRCLES
  - From: mjc5 <mjc5@psu.edu>
- Re: ATM ROTOZIPPPING CIRCLES
  - From: "NetHere" <bobmay@nethere.com>

Prev by Author: ATM $50 Grinding/Polishing Machine
Next by Author: Re: ATM Anodizing problems.
Prev by thread: Re: ATM Rosin instead of pitch for lap?
Next by thread: Re: ATM ROTOZIPPPING CIRCLES
Index(es):
- Author
- Thread