Amateur Telescope Makers (ATM) Archive for APR00 - by author

• Thread Index

• Re: ATM Metal Tube for a 10" Dob.
  • From: "Adams" <adams@rmci.net>
• ATM Computing Orbits
  • From: Adrien Bordage <bordagea@nbnet.nb.ca>
• Re: ATM Determining the index of refraction of glass
  • From: ahighe@ix.netcom.com
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Ak55c@aol.com
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Ak55c@aol.com
• Re: ATM truss bending calculations (long)
  • From: "Albert Highe" <ahighe@ix.netcom.com>
• Vikings were ATMs ?
  • From: Alec Muffett <alecm@crypto.dircon.co.uk>
• ATM nippon gears
  • From: "Alexander Urban" <alexander.urban@gmx.de>
• ATM: Keeping Dust off
  • From: Andres.Dandler.97@Alum.Dartmouth.ORG (Andres Dandler 97)
• ATM: Crayford focuser
  • From: Andres.Dandler.97@Alum.Dartmouth.ORG (Andres Dandler 97)
• Re: ATM Threads in Al box section?
  • From: andrew <alocky@geol.uwa.edu.au>
• SEC: UNCLASSIFIED. RE: ATM Stepper motor resource list?
  • From: Andrew.Martyn@defence.gov.au
• ATM Re: atm-digest V1 #2094
  • From: "Andy Mail" <amail@scimar.com>
• ATM Best wood for Dob mount
  • From: "Andy Mail" <amail@scimar.com>
• ATM f ratio
  • From: "Andy Mail" <amail@scimar.com>
• Re: ATM The most stupid mistake
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Expansion calc.
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Expansion calc. Deformation in mirrors as a function of thickness variation to delta temp
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM respacing Paracorr
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Cassegrain formulae
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Right angle finder, convertion to.....
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM PIVOT BOLT troubles.
  • From: Andy Saulietis <iss@pvtnetworks.net>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Beseler
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Rotating upper cage
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM vacuum chamber configuration
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM vacuum chamber configuration
  • From: Andy Saulietis <iss@pvtnetworks.net>
• [Fwd: ATM Star Testing]
  • From: Anthony Arrigo <aarrigo@csolutions.net>
• Re: ATM Here we go again. Another big mirror....
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM The most stupid mistake
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Horrible figure!
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Horrible figure!
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Thanks and apologee (was: The most stupid mistake)
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Recent Fascinating Light Experiments
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM: Cutting Glass Circles
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM absorbance curve for BK7
  • From: Anthony Stillman <atmer@flash.net>
• ATM Too Thin?
  • From: Anthony Stillman <atmer@flash.net>
• ATM TRO Hyper-link
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Expansion calc.
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Glass molds for casting/slumping blanks...
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM - Kiln Design
  • From: Anthony Stillman <atmer@flash.net>
• ATM What price glass?
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Stroke for flatening flats
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Secondary flatness...
  • From: Anthony Stillman <atmer@flash.net>
• ATM Two slightly OT subjects
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM polishing 24" taking a long time
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Gallo's humour
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Gallo's humour
  • From: Anthony Stillman <atmer@flash.net>
• ATM Apology
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Determining the index of refraction of glass
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Determining the index of refraction of glass
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM f ratio
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM f ratio
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM f ratio
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM f ratio
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Marble Tool for Plate mirror?
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM FYI on Gold coating
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Marble Tool for Plate mirror?
  • From: Anthony Stillman <atmer@flash.net>
• ATM Fortuitous Find + an OT ?
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Fortuitous Find + an OT ?
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Re: Small Schmidt Cass
  • From: Aplanatic@aol.com
• ATM Figure - (yet another Foucault analysis program)
  • From: Aplanatic@aol.com
• ATM Comments About Figure32.exe
  • From: Aplanatic@aol.com
• ATM Build/Design of a Kiln.
  • From: Aplanatic@aol.com
• Re: ATM Spider hub twisting (was: Aluminium truss structures)
  • From: Aplanatic@aol.com
• Re: ATM Stroke for flatening flats
  • From: Aplanatic@aol.com
• Re: ATM truss bending calculations (long)
  • From: Aplanatic@aol.com
• ATM Figure, A Foucault Analysis Program
  • From: Aplanatic@aol.com
• Re: ATM Figuring/Testing my 8" f8
  • From: Aplanatic@aol.com
• ATM Aluminum, Split Ring, Astrograph
  • From: Aplanatic@aol.com
• Re: ATM Pre-polishing Question
  • From: Aplanatic@aol.com
• Re: ATM Wynne corrector
  • From: Aplanatic@aol.com
• Re: ATM Figuring/Testing my 8" f8
  • From: Aplanatic@aol.com
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Aplanatic@aol.com
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Aplanatic@aol.com
• Re ATM Routing
  • From: "Archer Sully" <archer@meer.net>
• ATM Threads in Al box section?
  • From: Archer Sully <archer@meer.net>
• ATM Re: atm-digest V1 #2099
  • From: Archer Sully <archer@meer.net>
• ATM Thoughts on scope temperature
  • From: "Arjan te Marvelde (EMN)" <Arjan.te.Marvelde@emn.ericsson.se>
• ATM thoughts on scope temperature
  • From: "Arjan te Marvelde (EMN)" <Arjan.te.Marvelde@emn.ericsson.se>
• RE: ATM Building CCD cameras
  • From: "Arjan te Marvelde (EMN)" <Arjan.te.Marvelde@emn.ericsson.se>
• ATM Tremendous eye relief...?!
  • From: Asaf Shtull-Trauring <asafmail@yahoo.com>
• ATM Reject fused quartz
  • From: Astropaulo@aol.com
• Re: ATM Reject fused quartz
  • From: Astropaulo@aol.com
• Re: ATM Reject fused quartz-checking it out
  • From: Astropaulo@aol.com
• ATM 26" BVC blank
  • From: Astropaulo@aol.com
• ATM Re: Reject fused quartz
  • From: Astropaulo@aol.com
• ATM enough!!
  • From: Bakernv@aol.com
• Re: Ancient Viking ATMers
  • From: "Barlow Pepin" <atmjedit@conceptsnet.com>
• ATM Formica Method -- was, Glue for..?
  • From: "Barlow Pepin" <atmjedit@conceptsnet.com>
• Re: ATM Formica Method -- was, Glue for..?
  • From: "Barlow Pepin" <atmjedit@conceptsnet.com>
• Re: ATM Formica Method -- clamping discs
  • From: "Barlow Pepin" <atmjedit@conceptsnet.com>
• ATM 1/4" thick too thin for 4.5" mirror?
  • From: Barrett Richardson <rabtter@sparky.state.ky.us>
• Re: ATM 1/4" thick too thin for 4.5" mirror?
  • From: Barrett Richardson <rabtter@sparky.state.ky.us>
• Re: ATM 1/4" thick too thin for 4.5" mirror?
  • From: Barrett Richardson <rabtter@sparky.state.ky.us>
• [ATM] GP / CG-5 Digital Setting Circle Mounting Web Page
  • From: BBarnibus@aol.com
• Re: ATM Setting Circles
  • From: "Bell, Andrew" <AMB2@pge.com>
• ATM Hybrid Design With Rotating Cage
  • From: "Bell, Andrew" <AMB2@pge.com>
• ATM Re: Dave Rowe
  • From: "Bill Cook" <atmj1@conceptsnet.com>
• ATM Re: 12-inch tube
  • From: "Bill Cook" <atmj1@conceptsnet.com>
• Re: ATM The most Stupid mistake
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Group thoughts on Mirror Testing: Data Input/Analysis CHECK LIST and pointers.
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Group thoughts on Mirror Testing: Data Input/Analysis CHECK LIST and pointers.
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Kit Costs for 12"
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Whatsa the catch? Inexpensive eye pieces?
  • From: Bill Gillespie <bgillespie@pcrs.net>
• **Running List** ATM Group thoughts on Mirror Figuring and Testing: Data Input/Analysis CHECK LIST, pointers.
  • From: Bill Gillespie <bgillespie@pcrs.net>
• **Running List** ATM Group thoughts on Mirror Figuring and Testing: Data Input/Analysis CHECK LIST, pointers.]
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Scope Pictures
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM A better approach for a collaborative **Running List** on any given topic ........
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Regarding light traveling through air.
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM: Keeping Dust off
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Muffin Fans - an AC fan in 12v DC ?
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Keeping Dust Off
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Making baffles out'a masonite?? Minwax "Wood Restorer"
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM More Ideas - Making baffles out'a masonite??
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Expansion calc. Deformation in mirrors as a function of thickness variation to delta temp
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Re: Faster Mirror Cooling and Thermal Regualtion - HOT/COLD chips
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Any Links to - "Foam" to use for camera and telescope equip.
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Re: Faster Mirror Cooling and Thermal Regualtion - HOT/COLD chips
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Re: Faster Mirror Cooling - thermo electric "Peltier Devices"
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Re: Faster Mirror Cooling and Thermal Regulation - HOT/COLD chips
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Re: Faster Mirror Cooling - Surplus Peltier Devices
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Re: Faster Mirror Cooling - thermo electric"PeltierDevices"
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Thinking Ahead : New Fellows Questions and some answers
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Thinking Ahead
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Focal Ratio help
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Focal Ratio help
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM best shaping and placement - teflon??
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Glue for Formica?
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM PIVOT BOLT troubles.
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Re: quartz...
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Re: quartz... Correction
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM: Crayford focuser (making a flat by hand)
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM remote operation of amateur observatories (Winer Observatory)
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM First Scope: 8" dob using the NEWT PROGRAM - Design input,advice and pointers?
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM remote operation of amateur observatories (Winer Observatory)
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Pivot Bolts and repairs
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Formica Method - Inexpensive Hose Clamps
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Best secondary size??? ( NEWT design program Link )
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Dobsonian Pivot Bolt Installation: Drilling with a hand drill.
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM 10" x 49" SONOTUBE - NEW - free to a good home : )
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Works every time
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM A Krylon UFB Alternative ... and wierd light reflections??
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Re:First Scope: 8" dob using the NEWT PROGRAM - Design input,advice and pointers?]
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Marble Tool for Plate mirror?
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Marble Tool for Plate mirror?
  • From: Bill Gillespie <bgillespie@pcrs.net>
• ATM Inexpensive source of adjustable latch clasps.
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Diagonal Size Part Two ..... and Part Three! : ) Questions Questions!!
  • From: Bill Gillespie <bgillespie@pcrs.net>
• Re: ATM Sub-aperature corrector Maksutov
  • From: Bill McHale <wmchal1@umbc.edu>
• ATM The most Stupid mistake
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• ATM Thanks and apologee (was: The most stupid mistake)
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• RE: ATM Group thoughts on Mirror Testing: Data Input/Analysis CHECK LIST and pointers.
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• RE: ATM Threads in Al box section?
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• RE: ATM Thinking Ahead
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• RE: ATM Metal Tube for a 10" Dob.
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• RE: ATM Glue for Formica?
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• RE: ATM threaded inserts
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• RE: ATM Star Testing
  • From: Bob Prabowo <BOB@BAHANA.CO.ID>
• ATM Secondary Size - Camera
  • From: Bob Van Deusen <bobmsb@prairie.lakes.com>
• ATM Finished 8"
  • From: Bob Van Deusen <bobmsb@prairie.lakes.com>
• ATM Re: best wood for dob mount
  • From: Bobrobbob@aol.com
• Re: ATM Figure - (yet another Foucault analysis program)
  • From: "bprewitt" <bprewitt@neo.rr.com>
• Re: ATM Begging for science / foucault question
  • From: Brad Davy <bdavy@fred.net>
• ATM Crystal growth usable for lenses?
  • From: Brad Davy <bdavy@fred.net>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: Brad Davy <bdavy@fred.net>
• Re: ATM: A few neophyte questions
  • From: Brad Davy <bdavy@fred.net>
• ATM respacing Paracorr
  • From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
• ATM 16" blank thickness
  • From: brauch <a.brauch@okay.net>
• ATM 16" blank thickness extended question
  • From: brauch <a.brauch@okay.net>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: "bravhart mail" <bravhart@cgocable.net>
• Re: ATM Artifical Star test.
  • From: "Brent Russell" <brussel@global.co.za>
• Re: ATM The most stupid mistake
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM TRO Hyper-link
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Keeping Dust Off
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Off topic posts....
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Used Science and Tech Book sources?
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Gallo's humour
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM aluminum Routing
  • From: "Brian S. Boothman" <bboothman@unitedmold.com>
• Re: ATM Best wood for Dob mount
  • From: "Brian S. Boothman" <bboothman@unitedmold.com>
• ATM Diamond compound for final polishing.
  • From: "Brian S. Boothman" <bboothman@unitedmold.com>
• Re: ATM Diamond hole cutters
  • From: "Brian S. Boothman" <bboothman@unitedmold.com>
• ATM remove
  • From: brien <briend@home.com>
• Re: ATM aluminum routing
  • From: "Bruce Sayre" <sayre@foothill.net>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: "Bruce Sayre" <sayre@foothill.net>
• Re: ATM flocking paper adhesive
  • From: "Bryan Greer" <bgreer@fpi-protostar.com>
• Re: ATM Glue for Formica?
  • From: "Buddy In NY" <maxwebhead@mindspring.com>
• Re: ATM Ideas for stripping formica from side bearings...
  • From: "Buddy In NY" <maxwebhead@mindspring.com>
• Re: ATM Formica Method -- was, Glue for..?
  • From: "Buddy In NY" <maxwebhead@mindspring.com>
• Re: ATM Glass dust filters
  • From: "Buddy In NY" <maxwebhead@mindspring.com>
• Re: ATM remote operation of amateur observatories (Winer Observatory)
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM Ronchi curves and parabolization mystery
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM aluminum Routing
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM aluminum Routing
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM aluminum Routing
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM polishing 24" taking a long time
  • From: Cary Chleborad <bennu@ns.net>
• ATM: What does Texereau Know?
  • From: "Charles O'Donnell" <kozmickid@mindspring.com>
• Re: ATM FW: A different form of teflon.
  • From: "Charles O'Donnell" <kozmickid@mindspring.com>
• ATM Sub-aperature corrector Maksutov
  • From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
• Re: ATM Sub- Ap Mak/Newt
  • From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
• ATM Building CCD cameras
  • From: "Chris Alberts" <chr.alberts@12move.nl>
• RE: ATM Building CCD cameras
  • From: "Chris Alberts" <chr.alberts@12move.nl>
• ATM Pitch Lap Help
  • From: Chris Mansfield <atmvega@yahoo.com>
• ATM Filter in Outlook Express
  • From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
• Re: ATM measures
  • From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
• FW: ATM sub-arcsec micrometer precision
  • From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
• ATM Monkey Virus Knocked My Socks Off
  • From: Christopher Krubel <ckrubel@bellsouth.net>
• Re: ATM Off topic posts....
  • From: Christopher Krubel <ckrubel@bellsouth.net>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Rotating upper cage
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Rotating upper cage
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: SV: ATM Rotating upper cage
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Scope Pictures
  • From: "Chuck Gulker" <cgulker@columbus.rr.com>
• ATM Determining the index of refraction of glass
  • From: Chuck Klingel <cklingel@aepkg.com>
• Re: ATM Rotating upper cage
  • From: "Chuck Shaw" <cshaw@ghg.net>
• Re: ATM Rotating upper cage
  • From: Chuck Shaw <cshaw@ghg.net>
• ATM re: Field Rotation & Imaging (kinda long)
  • From: Chuck Shaw <cshaw@ghg.net>
• RE: ATM threaded inserts
  • From: "Claude SERQUET" <claude.serquet@actant.com>
• ATM Re: Crayford focuser
  • From: "Clayton Kessler" <ckessler@gatecom.com>
• Re: ATM wide-field refractor
  • From: "Clayton Kessler" <ckessler@gatecom.com>
• Re: ATM threaded inserts
  • From: "Clayton Kessler" <ckessler@gatecom.com>
• Re; ATM kiln
  • From: Clint Bach <clintbach@earthlink.net>
• ATM FW: A different form of teflon.
  • From: Clive Milne <milnecd@yahoo.com>
• Re: ATM best shaping and placement - teflon??
  • From: Clive Milne <milnecd@yahoo.com>
• Re: ATM FW: A different form of teflon.
  • From: Clive Milne <milnecd@yahoo.com>
• Re: ATM telescope pictures
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Enough already
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Aluminium truss structures.
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Spiders (geometry)
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Spiders (diffraction)
  • From: Clive Milne <milnecd@yahoo.com>
• No Subject
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Relevance of limiting magnitude.
  • From: Clive Milne <milnecd@yahoo.com>
• ATM More spiders in the attic
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Gallo's humour
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Offset wire spiders
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Wire spiders...again
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Wynne corrector
  • From: Clive Milne <milnecd@yahoo.com>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Cable drive
  • From: Clive Milne <milnecd@yahoo.com>
• Re ATM Plywood/Hardwood/Softwood
  • From: "Colin Harris" <colinharris4@compuserve.com>
• ATM Manual & motorized
  • From: Colin Harris <COLINHARRIS4@compuserve.com>
• ATM Excel-lent scope control?
  • From: "Colin James" <seejay@fastinternet.net.au>
• ATM a little machine shop humor
  • From: crawford@goingware.com
• Questions from newbie ATM'er (relatively long)
  • From: Curt Wittenberg <curtw@scripps.edu>
• Questions from newbie ATM'er
  • From: Curt Wittenberg <curtw@scripps.edu>
• Re: Questions from newbie ATM'er
  • From: Curt Wittenberg <curtw@scripps.edu>
• ATM Mirrors and coatings - newbie questions
  • From: Curt Wittenberg <curtw@scripps.edu>
• ATM FYI on Gold coating
  • From: Curt Wittenberg <curtw@scripps.edu>
• ATM Secondary size question
  • From: Curt Wittenberg <curtw@scripps.edu>
• Re: ATM Metal Tube for a 10" Dob.
  • From: Curtis MacDonald <deepsky@union-tel.com>
• Re: ATM Flat Black Paint
  • From: dad <strahan@umd5.umd.edu>
• Re: ATM Here we go again. Another big mirror....
  • From: "Dale Campbell" <campbeld@abs-lcms.com>
• ATM Truss tubes lenght
  • From: "Damien Van Holm" <Damien.Van.Holm@orange.be>
• ATM new dob !
  • From: "Damien Van Holm" <Damien.Van.Holm@orange.be>
• Re: ATM new dob !
  • From: "Damien Van Holm" <Damien.Van.Holm@orange.be>
• Re: ATM Here we go again. Another big mirror....
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM The most Stupid mistake
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM absorbance curve for BK7
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM expansion tables
  • From: Dan Cassaro <dcass@mediaone.net>
• ATM Waineo machine question
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM Waineo machine question
  • From: Dan Cassaro <dcass@mediaone.net>
• ATM Off topic posts....
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM truss bending calculations (long)
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM Determining the index of refraction of glass
  • From: Dan Cassaro <dcass@mediaone.net>
• ATM Glass dust filters
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM More Newbie Help
  • From: Dan Cassaro <dcass@mediaone.net>
• Re: ATM: Keeping Dust off
  • From: Dan Chaffee <dchaffee@gvi.net>
• Re: ATM Figuring mirror - HELP!! (how to)
  • From: Dan Chaffee <dchaffee@gvi.net>
• Re: ATM Figuring mirror - HELP!! (how to)
  • From: Dan Chaffee <dchaffee@gvi.net>
• Re:ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: Dan Chaffee <dchaffee@gvi.net>
• Re: ATM Star Test
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM - Monochromatic Light
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Waineo machine question
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Glue for Formica?
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Spider hub twisting (was: Aluminium truss structures)
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM spider vanes
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM spider vanes
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM spider vanes
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM spider vanes
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Gallo's humour
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Rotating upper cage
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Glass dust filters
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM visual-photographic combination numbers
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM measures
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM dielectric mirrors
  • From: "Dave Bevel" <davebevel@mindspring.com>
• ATM Swiss motors
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM BASIC QUESTION
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM Odd spam
  • From: "Dave Bevel" <davebevel@mindspring.com>
• ATM Recent post from Ivan Krasnev ofr MODAS software
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM Stepper motor resource list?
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM Threads in Al box section?
  • From: "Dave Bevel" <davebevel@mindspring.com>
• ATM Re: cutting glass with ultrasonic CNC mill
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM the secondary mirror,
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM Guys
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM Glue for Formica?
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM mirror making help
  • From: "Dave Bevel" <davebevel@mindspring.com>
• ATM Re: Crayford focuser
  • From: "Dave Bevel" <davebevel@mindspring.com>
• Re: ATM Uk Router bits
  • From: "Dave Bevel" <davebevel@mindspring.com>
• ATM Aluminising Web Page
  • From: Dave Gault <daveg@tpg.com.au>
• Re: ATM Who can supply large blanks??
  • From: Dave Gault <daveg@tpg.com.au>
• Re: ATM vacuum chamber configuration
  • From: Dave Gault <daveg@tpg.com.au>
• Re: ATM Diamond hole cutters
  • From: Dave Gault <daveg@tpg.com.au>
• ATM How can I tell last grit used?
  • From: Dave Gill <dpgill@raex.com>
• Re: ATM How can I tell last grit used?
  • From: Dave Gill <dpgill@raex.com>
• Re: ATM How can I tell last grit used?
  • From: Dave Gill <dpgill@raex.com>
• Re: ATM carbon fiber tubes
  • From: "Dave Pitou" <dpitou@ix.netcom.com>
• Re: ATM vacuum chamber configuration
  • From: Dave Smith <smithers@ucla.edu>
• Re: ATM Painting a Yazoo Mills tube
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Burnishing a newly silvered mirror
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Crystal growth usable for lenses?
  • From: Dave Sopchak <das@po.cwru.edu>
• ATM silicosis prevention?
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM - Starting Over
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Mirror figuring truly random
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Mirror figuring truly random
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Thinking Ahead
  • From: davebevel@mindspring.com
• Re: ATM Re: Crayford focuser
  • From: David and Sherry Trahan <strahan@umd5.umd.edu>
• ATM Article on Pitch
  • From: David and Sherry Trahan <strahan@umd5.umd.edu>
• Re: ATM Whatsa the catch? Inexpensive eye pieces?
  • From: "David B. Toth" <ve3gyq@amsat.org>
• ATM polishing 24" taking a long time
  • From: david lewis <lewis@eecg.toronto.edu>
• Re: ATM 16" blank thickness extended question
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Glue for Formica?
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Mirror coatings/ mirror polishing
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Begging for science / foucault question
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Best secondary size???
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Works every time
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Help: New TV BinoVue too heavy for my Crayford focuser
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Review of GTO Eyepiece: Was ATM Whatsa the catch? Inexpensive eye pieces?
  • From: David Sleeter <sleete19@idt.net>
• ATM Recent Fascinating Light Experiments
  • From: David Sleeter <sleete19@idt.net>
• ATM GTO Plossl vs. Celestron Plossl: An Interesting Experiment
  • From: David Sleeter <sleete19@idt.net>
• ATM Narrow Field Stops on GTO Eyepieces? Email to Hand-On-Optics
  • From: David Sleeter <sleete19@idt.net>
• ATM 100 Inch Mirror?
  • From: David Sleeter <sleete19@idt.net>
• Re: ATM Determining the index of refraction of glass
  • From: David Sleeter <sleete19@idt.net>
• ATM polishing
  • From: David Smith <smithers@ucla.edu>
• Re: ATM OTA diameter, was rotating upper cage
  • From: David Smith <smithers@ucla.edu>
• Re: ATM vacuum chamber configuration
  • From: David Smith <smithers@ucla.edu>
• Re: ATM How many strokes per minute
  • From: David Smith <smithers@ucla.edu>
• ATM Keeping Dust Off
  • From: Dean Ketelsen <ketelsen@as.arizona.edu>
• ATM POLISHING PADS
  • From: Dean Ketelsen <ketelsen@as.arizona.edu>
• ATM drive for ball scope
  • From: deepsky <deepsky@usmo.com>
• ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM Non-metallic spherical washers
  • From: Del Stanton <sd20@earthlink.net>
• ATM 386 Notebook Virus Alert - my cure
  • From: Del Stanton <sd20@earthlink.net>
• ATM Moving 386 Laptop traffic OFF this list - web page established
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM Waineo machine question
  • From: Dennis Rech <dennisrech@home.com>
• RE: ATM - Starting Over - Now metal tools
  • From: Dennis Rech <dennisrech@home.com>
• Re: ATM How many strokes per minute
  • From: Dennis Rech <dennisrech@home.com>
• ATM mirror making help
  • From: Designsdavis@aol.com
• ATM glass pouring
  • From: Designsdavis@aol.com
• ATM pouring glass blanks help
  • From: Designsdavis@aol.com
• ATM EMI 9524B PMT
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM 1/4" thick too thin for 4.5" mirror?
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM 1/4" thick too thin for 4.5" mirror?
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: Ancient Viking ATMers
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Sub-aperature corrector Maksutov
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM absorbance curve for BK7
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Too Thin?
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Sub-aperature corrector Maksutov
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM John Zeitz obituary
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Glass molds for casting/slumping blanks...
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM please confine posts to ATMing
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Mirror coatings/ mirror polishing
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Puzzled about the limiting magnitude of the eye.....
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM remote operation of amateur observatories
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM why the visual is 760-380
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM remote operation of amateur observatories (Winer Observatory)
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM remote operation of amateur observatories (Winer Observatory)
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Excel-lent scope control?
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• RE: ATM Excel-lent scope control?
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM silicosis prevention?
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• ATM sub-arcsec micrometer precision
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Building CCD cameras
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM sub-arcsec micrometer precision
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM vacuum chamber configuration
  • From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
• RE: ATM Dew problems? / Newbie question...
  • From: Don Clement <dclement@littlefeet-inc.com>
• RE: ATM Dew problems? / Newbie question...
  • From: Don Clement <dclement@littlefeet-inc.com>
• RE: ATM Flat Black Paint
  • From: Don Clement <dclement@littlefeet-inc.com>
• RE: ATM Right angle finder, convertion to.....
  • From: Don Clement <dclement@littlefeet-inc.com>
• RE: ATM Build/Design of a Kiln.
  • From: Don Clement <dclement@littlefeet-inc.com>
• RE: ATM Delrin and Aluminum Spherometers.
  • From: Don Clement <dclement@littlefeet-inc.com>
• RE: ATM truss bending calculations (long)
  • From: Don Clement <dclement@littlefeet-inc.com>
• RE: ATM POLISHING PADS
  • From: Don Clement <dclement@littlefeet-inc.com>
• RE: ATM sub-arcsec micrometer precision
  • From: Don Clement <dclement@littlefeet-inc.com>
• ATM Keeping Dust Off
  • From: Don Halter <dhalter@ghg.net>
• Re: ATM 8 inch achromat
  • From: Donald Clement <clement@inetworld.net>
• Re: ATM Eyepiece focusing tube alignment?
  • From: Donald Clement <clement@inetworld.net>
• Re: ATM Works every time
  • From: Donald Clement <clement@inetworld.net>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Donald Clement <clement@inetworld.net>
• Re: ATM sub-arcsec micrometer precision
  • From: Donald Clement <clement@inetworld.net>
• Re: ATM Here we go again. Another big mirror....
  • From: "Donn Starkey" <starkey@fwi.com>
• Re: ATM The most Stupid mistake
  • From: Donovan Buck <donovan@bravoz.com>
• ATM Non-metallic spherical washers
  • From: Donovan Buck <donovan@bravoz.com>
• Re: ATM Kiln
  • From: "Doug Hair" <loug1@prodigy.net>
• Re: ATM Any Links to - "Foam" to use for camera and telescope equip.
  • From: "Doug Hair" <loug1@prodigy.net>
• Re: ATM The most Stupid mistake
  • From: doug kniffen <dk@usmo.com>
• Re: ATM Star Test
  • From: doug kniffen <dk@usmo.com>
• Re: ATM Puzzled about the limiting magnitude of the eye.....
  • From: doug kniffen <dk@usmo.com>
• Re: ATM Rotating upper cage
  • From: doug kniffen <dk@usmo.com>
• ATM Unsquare focusers
  • From: doug kniffen <dk@usmo.com>
• Re: Re[2]: ATM Rotating upper cage
  • From: doug kniffen <dk@usmo.com>
• Re: Re[4]: ATM Rotating upper cage
  • From: doug kniffen <dk@usmo.com>
• Re: ATM Rotating upper cage
  • From: doug kniffen <dk@usmo.com>
• Re: Re[6]: ATM Rotating upper cage
  • From: doug kniffen <dk@usmo.com>
• Re: ATM Unsquare focusers
  • From: doug kniffen <dk@usmo.com>
• Re: Re[8]: ATM Rotating upper cage
  • From: doug kniffen <dk@usmo.com>
• ATM Unsquare Focusers-The Sketch
  • From: doug kniffen <dk@usmo.com>
• Re: ATM Achro/APO Lens Design - US Patent
  • From: Doug Miller <mildg@sk.sympatico.ca>
• Re: ATM Determining the index of refraction of glass
  • From: Doug Miller <mildg@sk.sympatico.ca>
• Re: ATM Kit Costs for 12"
  • From: "Doug Wainwright" <dougwainwright@home.com>
• Re: ATM Odd spam
  • From: "Dunk B." <Dunk@MyOdyssey.freeserve.co.uk>
• ATM Uk Router bits
  • From: "Dunk B." <Dunk@MyOdyssey.freeserve.co.uk>
• Re ATM Plywood/Hardwood/Softwood
  • From: "Dunk B." <Dunk@MyOdyssey.freeserve.co.uk>
• Re: ATM Star Test
  • From: Dwight Elvey <elvey@hal.com>
• ATM Making a Barlow, where will things end up for parfocal. Longish
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Star Test
  • From: Dwight Elvey <elvey@hal.com>
• RE[2]: ATM Threads in Al box section?
  • From: Dwight Elvey <elvey@hal.com>
• Re: Ancient Viking ATMers
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Re: Faster Mirror Cooling - thermo electric "PeltierDevices"
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Foucault Formulas and light source position....
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Foucault Formulas and light source position....
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Eyepiece focusing tube alignment?
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Edge Chips on Blank and False Ideas
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Build/Design of a Kiln.
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Focuser Baffle
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Begging for science / foucault question
  • From: Dwight Elvey <elvey@hal.com>
• ATM Baffles between secondary and eyepiece
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Stroke for flatening flats
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Baffles between secondary and eyepiece (fwd)
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM aluminum Routing
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Edge Chips on Blank and False Ideas]]
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Mirror polishing and pitch lap questions
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Rotating upper cage
  • From: Dwight Elvey <elvey@hal.com>
• RE[2]: ATM truss bending calculations (long)
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Best secondary size???
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: Dwight Elvey <elvey@hal.com>
• Re[4]: ATM aluminum Routing
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM - Best Secondary Size
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Rotating upper cage
  • From: Dwight Elvey <elvey@hal.com>
• Re[4]: ATM Rotating upper cage
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Rotating upper cage
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Tremendous eye relief...?!
  • From: Dwight Elvey <elvey@hal.com>
• Re: SV: ATM Rotating upper cage
  • From: Dwight Elvey <elvey@hal.com>
• Re: Clearly a top notch ATM organization
  • From: Dwight Elvey <elvey@hal.com>
• Re[8]: ATM Rotating upper cage
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Unsquare focusers
  • From: Dwight Elvey <elvey@hal.com>
• Re: Re ATM Plywood/Hardwood/Softwood
  • From: Dwight Elvey <elvey@hal.com>
• RE[2]: ATM sub-arcsec micrometer precision
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Artifical Star test.
  • From: Dwight Elvey <elvey@hal.com>
• RE: ATM Glue for Formica?
  • From: Ed Falk <Ed.Falk@Eng.Sun.COM>
• ATM How to make a spherometer?
  • From: Ed Stevens <ed@trillium-hollow.org>
• ATM Making baffles out'a masonite??
  • From: Ed Taychert <elt@irony.com>
• Re: ATM More Ideas - Making baffles out'a masonite??
  • From: Ed Taychert <elt@irony.com>
• Re: ATM Making baffles out'a masonite??
  • From: Ed Taychert <elt@irony.com>
• ATM Corning Flat Glass
  • From: Eddwen@aol.com
• Re: ATM expansion tables
  • From: Edwin Spector <ems@lucent.com>
• ATM telescope pictures
  • From: Eric Royer <eroyer@club-internet.fr>
• Re: ATM telescope pictures
  • From: Eric Royer <eroyer@club-internet.fr>
• ATM Help with star test results
  • From: Eric Uthus <eric_uthus@und.nodak.edu>
• ATM foucault/ronchi questions on mirror
  • From: Eric Uthus <eric_uthus@und.nodak.edu>
• ATM foucault/ronchi questions on mirror - resubmitted (error in first post)
  • From: Eric Uthus <eric_uthus@und.nodak.edu>
• Re: ATM POLISHING PADS
  • From: Everett Cairns <ecairns@MCMAIL.CIS.MCMASTER.CA>
• ATM OT: New Large Mirror on EBAY
  • From: "Fansler, David" <DFANSLER@AutoCyte.com>
• ATM RE:[OT] New Large Mirror on EBAY
  • From: "Fansler, David" <DFANSLER@AutoCyte.com>
• RE: ATM The future is here
  • From: "Fansler, David" <DFANSLER@AutoCyte.com>
• ATM [OT]:Peace
  • From: "Fansler, David" <DFANSLER@AutoCyte.com>
• Re: ATM Building CCD cameras
  • From: Frank Henriquez <frank@ucla.edu>
• Re: ATM Building CCD cameras
  • From: Frank Henriquez <frank@ucla.edu>
• RE: ATM Audine CCD and Mel's alt/az software
  • From: Frank Henriquez <frank@ucla.edu>
• Re: ATM Building CCD cameras
  • From: Frank Henriquez <frank@ucla.edu>
• Re: ATM TRO Hyper-link
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM 12" Meade LX200
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• ATM First star test-equivocal but encouraging
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• ATM Stroke for flatening flats
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM truss bending calculations (long)
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM Works every time
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM Unsquare focusers
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM The most Stupid mistake
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Odd spam
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM 8 inch achromat
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM The most stupid mistake
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM improvements
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM: Cutting Glass Circles
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM: Keeping Dust off
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Muffin Fans - an AC fan in 12v DC ?
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Muffin Fans - an AC fan in 12v DC ?
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM: Keeping Dust off
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Muffin Fans
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Making baffles out'a masonite??
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Expansion calc. Deformation in mirrors as a function of thickness variation to delta temp
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM One more question
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM How can I tell last grit used?
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM Re: What does Texereau Know?
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Figuring mirror - HELP!! (how to)
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM How can I tell last grit used?
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Refractor Lens
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Thinking Ahead
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Finished 8"
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Focal Ratio help
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM FW: A different form of teflon.
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Off Subject - Where to find astronomy/commercial telescope Email list?
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM best shaping and placement - teflon??
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM - Kiln Design
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Zirconium Oxide - rouge
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM polishing
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM Re: Crayford focuser
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM aluminum Routing
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Spiders (diffraction)
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM The future is here
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM new dob !
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Kiln for precision annealing.
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM truss bending calculations (long)
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM polishing 24" taking a long time
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Plaster of paris tools
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM spider vanes
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Works every time
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Pre-polishing Question
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Works every time
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: Questions from newbie ATM'er (relatively long)
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM enough!!
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Flat mounting plate for solid tube?
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Fortuitous Find + an OT ?
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM stars
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Marble Tool for Plate mirror?
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Diagonal Size Part Two
  • From: "Frank Ward" <thewards@mindspring.com>
• ATMing in the June Sky&Telescope
  • From: Gary Seronik <gseronik@netway.com>
• ATM Pre-polishing Question
  • From: Gary Seronik <gseronik@netway.com>
• ATM Odd spam
  • From: Gary Woods <gwoods@albany.net>
• Re: ATM Odd spam
  • From: Gary Woods <gwoods@albany.net>
• Re: ATM Odd spam
  • From: Gary Woods <gwoods@albany.net>
• Re: ATM Muffin Fans - an AC fan in 12v DC ?
  • From: Gary Woods <gwoods@albany.net>
• ATM Stepper motor resource list?
  • From: "Geoff Dudley" <gdudley@swin.edu.au>
• ATM Figuring mirror - HELP!! (how to)
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM URL correction; HELP!! + mirror making overview
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM Re: Faster Mirror Cooling and Thermal Regulation - HOT/COLD chips
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM Eyepiece focusing tube alignment?
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM Mirror coatings/ mirror polishing
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM Begging for science / foucault question
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM Mirror figuring truly random
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM Works every time
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM heartfelt apology
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM Lies and more lies
  • From: Geoff Gallo <gallo@student.umass.edu>
• Clearly a top notch ATM organization
  • From: Geoff Gallo <gallo@student.umass.edu>
• ATM figuring advice
  • From: Geoff Gallo <gallo@student.umass.edu>
• Re: ATM TRO Hyper-link
  • From: George Anderson <georgea@CAM.ORG>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: George Anderson <georgea@CAM.ORG>
• Re: ATM aluminum Routing
  • From: George Anderson <georgea@CAM.ORG>
• Re: OT ATM The future is here
  • From: George Anderson <georgea@CAM.ORG>
• Re: Re ATM Routing
  • From: George Anderson <georgea@CAM.ORG>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: George Anderson <georgea@CAM.ORG>
• ATM: A few neophyte questions
  • From: George Anderson <georgea@CAM.ORG>
• ATM:A Roland Christen 11" Petzval Refractor scope recipe
  • From: "George L. Anderson" <georgea@cae.ca>
• ATM eyepieces-foclalengths v observation requirements
  • From: "George, Marple" <g.amos@geoamo39.free-online.co.uk>
• re ATM in milton keynes
  • From: "George, Marple" <g.amos@geoamo39.free-online.co.uk>
• Re: ATM Muffin Fans
  • From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
• ATM Metal Tube for a 10" Dob.
  • From: Gies <EGies@cni-usa.com>
• ATM Re: Another big mirror....
  • From: GregJ888@aol.com
• Re: ATM Faster Mirror Cooling - thermo electric"PeltierDevices"
  • From: GregJ888@aol.com
• Re: ATM aluminum Routing
  • From: GregJ888@aol.com
• RE: ATM Building CCD cameras
  • From: GregJ888@aol.com
• ATM Ronchi curves and parabolization mystery
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• ATM backwards ronchi
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM telescope pictures
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• ATM backwards ronchi
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM Best wood for Dob mount
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM Mixed Pitch?
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM Hardwood vs. Softwoods
  • From: heinld theo <theobald@ozemail.com.au>
• Re: ATM TRO Hyper-link
  • From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
• ATM Re: Faster Mirror Cooling and Thermal Regulation - HOT/COLD chips
  • From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
• Re: ATM vacuum chamber configuration
  • From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
• Re: ATM Cleaner
  • From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
• ATM Vertical Axis Bearings
  • From: hepone@juno.com
• ATM Sun Follower Circuits
  • From: hepone@juno.com
• ATM Beseler
  • From: "hg lindberg" <hans-goran.lindberg@vasteras.mail.telia.com>
• ATM wide-field refractor
  • From: "hg lindberg" <hans-goran.lindberg@vasteras.mail.telia.com>
• ATM FIGURING FOR THE FIRST TIME
  • From: HGLyall@aol.com
• ATM Coating Removal
  • From: Howard Clausing <hclaus@clausing.com>
• Re: ATM FYI on Gold coating
  • From: Howard Clausing <hclaus@clausing.com>
• Re: ATM Sub-aperature corrector Maksutov
  • From: "Igor G. Rozivika" <aso@sbor.ru>
• Re: ATM Mirror coatings/ mirror polishing
  • From: immorta <immorta@chariot.net.au>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: immorta <immorta@chariot.net.au>
• Re: ATM Lies and more lies
  • From: immorta <immorta@chariot.net.au>
• ATM my bad
  • From: immorta <immorta@chariot.net.au>
• ATM Fusing plate glass
  • From: immorta <immorta@chariot.net.au>
• Re: ATM Determining the index of refraction of glass (fwd)
  • From: "J.O. Williams" <jow@techbase.com>
• Re: ATM Setting Circles/Worst Mistake
  • From: "James O'Malley" <omalleyj@eclipse.net>
• Re: ATM Vertical Axis Bearings
  • From: "James O'Malley" <omalleyj@eclipse.net>
• Re: ATM Glue for Formica?
  • From: "James O'Malley" <omalleyj@eclipse.net>
• Re: ATM Glue for Formica?
  • From: "James O'Malley" <omalleyj@eclipse.net>
• Re: ATM Glue for Formica?
  • From: "James O'Malley" <omalleyj@eclipse.net>
• Re: ATM Glue for Formica?
  • From: "James O'Malley" <omalleyj@eclipse.net>
• Re: ATM Formica Method -- was, Glue for..?
  • From: "James O'Malley" <omalleyj@eclipse.net>
• Re: ATM Formica Method -- was, Glue for..?
  • From: "James O'Malley" <omalleyj@eclipse.net>
• Re: ATM Formica Method - Inexpensive Hose Clamps
  • From: "James O'Malley" <omalleyj@eclipse.net>
• ATM Mixed Pitch?
  • From: "James O'Malley" <omalleyj@eclipse.net>
• ATM Re New Large Mirror on EBAY-NOT
  • From: James P Crombie <jpcrombie@islandtelecom.com>
• ATM Re: Diamond hole saws
  • From: James P Crombie <jpcrombie@islandtelecom.com>
• Re: ATM Parabolizing... sorta..
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Figuring mirror - HELP!! (how to)
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Puzzled about the limiting magnitude of the eye.....
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM More on Limiting Magnitude.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Guys
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• Re: ATM the secondary mirror,
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• ATM spider vanes
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• Re: ATM OTA diameter, was rotating upper cage
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• ATM wire spider
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• Re: ATM Best wood for Dob mount
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• Re: ATM Best wood for Dob mount
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• ATM threaded inserts
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• ATM threaded inserts
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• Re: ATM Secondary size question
  • From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
• Re: ATM Kiln
  • From: "Janik Zikovsky" <jzikovsky@hotmail.com>
• ATM Encoders?
  • From: JB Askenmalm <askenmalm@telia.com>
• Re: ATM Waineo machine question
  • From: Jean-Guy Moreau <jgmoreau@lino.com>
• RE: ATM Build/Design of a Kiln.
  • From: Jean-Guy Moreau <jgmoreau@lino.com>
• ATM 1000" mirror
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM: 40" curve generated to f/3.6
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM magnitude
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM magnitude correction
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Figure, A Foucault Analysis Program
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM polishing 24" taking a long time
  • From: "Jeff Baldwin" <bald@gotnet.net>
• Re: ATM Sandblasting mirrors
  • From: "Jeff Baldwin" <bald@gotnet.net>
• ATM Re: Small Schmidt Cass
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Hyperbola problem
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Corrector plate
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Fw: ATM Re: Small Schmidt Cass
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Sub-aperature corrector Maksutov
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Cassegrain formulae
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Date: Mon, 10 Apr 2000 09:24:53 +0200
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Cassegrain formulae
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Burnishing a newly silvered mirror
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Cassegrain formulae
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Burnishing a newly silvered mirror
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Date: Tue, 11 Apr 2000 14:21:36 +0200
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Small Schmidt Cass
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Re: Pitch
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Excel Starhop 2
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM what is it?
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Copier lens and mirror
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Waineo Machine
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Re: Finished 8"
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Cass design vs cricket
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM More mathematics
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Pitch formula
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Pitch formula
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Pitch formula
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Pitch formula
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Pitch formula
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Waineo Machine
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Foucault formulas and light source
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Zirconium Oxide
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Public apology re : mathematics
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Glass molds for casting/slumping blanks...
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Zirconium Oxide
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• ATM Kilns refractory materials
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: Re: ATM Zirconium Oxide
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Off Subject - Where to find astronomy/commercial telescope Email list?
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Glue for Formica?
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM The future is here
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM aluminum Routing
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM aluminum Routing
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: Re[2]: ATM aluminum Routing
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Plaster of paris tools
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Plaster of paris tools
  • From: "Jerome Jooste" <jeromej@icon.co.za>
• Re: ATM Edge Chips on Blank and False Ideas]
  • From: Jerremy Baterson <jdbaterson@usa.net>
• RE: ATM Edge Chips on Blank and False Ideas]]
  • From: Jerremy Baterson <jdbaterson@usa.net>
• Re: ATM Edge Chips on Blank and False Ideas]]
  • From: Jerremy Baterson <jdbaterson@usa.net>
• ATM HELP!!! FIGURING HELP POLISHING!!!
  • From: Jerremy Baterson <jdbaterson@usa.net>
• ATM POLISHING PADS
  • From: Jerremy Baterson <jdbaterson@usa.net>
• ATM POLISHING PADS
  • From: Jerremy Baterson <jdbaterson@usa.net>
• ATM POLISHING PADS
  • From: Jerremy Baterson <jdbaterson@usa.net>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: jdo348@earthlink.net (Jerry Dove)
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: jdo348@earthlink.net (Jerry Dove)
• ATM New Tool
  • From: jdo348@earthlink.net (Jerry Dove)
• Re: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: jdo348@earthlink.net (Jerry Dove)
• Re: ATM Works every time
  • From: jdo348@earthlink.net (Jerry Dove)
• Re: ATM 8 days now
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: ATM: Keeping Dust off
  • From: Jerry Palmer <w6cwj@earthlink.net>
• ATM daylight planets
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: ATM daylight planets
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: Re ATM Routing
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: ATM The future is here
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: ATM Works every time
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: ATM Works every time
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: ATM Best wood for Dob mount
  • From: Jerry Palmer <w6cwj@earthlink.net>
• Re: ATM Star Test
  • From: Jim Fitch <jf@arn.net>
• Re: ATM 1/4" thick too thin for 4.5" mirror?
  • From: Jim Fitch <jf@arn.net>
• Re: ATM 1/4" thick too thin for 4.5" mirror?
  • From: Jim Fitch <jf@arn.net>
• Re: ATM Star Test
  • From: Jim Fitch <jf@arn.net>
• Re: ATM: Keeping Dust off
  • From: Jim Fitch <jf@arn.net>
• Re: ATM Pre-polishing Question
  • From: Jim Fitch <jf@arn.net>
• Re: Questions from newbie ATM'er (relatively long)
  • From: Jim Fitch <jf@arn.net>
• Re: ATM POLISHING PADS
  • From: Jim Fitch <jf@arn.net>
• Re: ATM POLISHING PADS
  • From: Jim Fitch <jf@arn.net>
• Re: Re ATM Blinking Finderscope
  • From: Jim Fitch <jf@arn.net>
• Re: ATM Best secondary size???
  • From: "Jim Fly" <flyj@earthlink.net>
• Re: ATM Determining the index of refraction of glass
  • From: "Jim Fly" <flyj@earthlink.net>
• Re: ATM Shelf Life of Pitch
  • From: Jimmy La Fountain <lafountainj@earthlink.net>
• ATM coring a mirror blank
  • From: "Joe Campbell" <joe@esper.com>
• ATM 386 laptops with viruses.
  • From: Joe campbell <joe@esper.com>
• ATM Re: 386 laptops and dead batteries
  • From: Joe campbell <joe@esper.com>
• ATM Re: remote control observatory
  • From: Joe campbell <joe@esper.com>
• ATM 8 days now
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM a lens on E-Bay
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Star Test
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Odd spam
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM TRO Hyper-link
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Keeping Dust Off
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Expansion calc.
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Expansion calc.
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM How can I tell last grit used?
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM How can I tell last grit used?
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Flat Black Paint
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM expansion tables
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Re: 386 laptops and dead batteries
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Sending system files
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Sending system files
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Mirror cells,
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM spider vanes
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM An off topic message about off topic messages
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Born Again "First Light" (very long)
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Star Testing
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Cleaner
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Artifical Star test.
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM vacuum chamber configuration
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM Fortuitous Find + an OT ?
  • From: Joe Mayenschein <mayen1@mwt.net>
• Re: ATM f ratio
  • From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
• Re: ATM Figuring/Testing my 8" f8
  • From: "John D. Upton" <upton@austin.ibm.com>
• Coma vs Figure - Was: Re: ATM f ratio
  • From: "John D. Upton" <upton@austin.ibm.com>
• ATM Corrector Plate Coating Removal
  • From: John Hutto <jdhutto@yahoo.com>
• ATM flocking paper adhesive
  • From: John Hutto <jdhutto@yahoo.com>
• Re: ATM Best secondary size???
  • From: John Hutto <jdhutto@yahoo.com>
• Re: ATM Building CCD cameras
  • From: John Hutto <jdhutto@yahoo.com>
• Re: ATM Building CCD cameras
  • From: John Hutto <jdhutto@yahoo.com>
• ATM Mirror polishing and pitch lap questions
  • From: "John Lynch" <john_p_lynch@hotmail.com>
• ATM Thanks! Re: Mirror Polishing & Lap Questions
  • From: "John Lynch" <john_p_lynch@hotmail.com>
• ATM Puzzled about the limiting magnitude of the eye.....
  • From: "John Murray" <johnm@gulf.net.au>
• ATM Who can supply large blanks??
  • From: "John Murray" <johnm@gulf.net.au>
• ATM Large blank suppliers.cont...
  • From: "John Murray" <johnm@gulf.net.au>
• Re: ATM New Scope
  • From: John Price <jmprice@cbvcp.com>
• Re: ATM threaded inserts
  • From: John Price <jmprice@cbvcp.com>
• ATM Foucault Formulas and light source position....
  • From: John S Spencer <jspencer@austinc.edu>
• Re: atm-digest V1 #2089 - ATM Crystal growth usable for lenses?
  • From: John Taylor <jwtaylor@cctrap.com>
• RE: Re ATM Routing
  • From: "Jon Cooper" <jbcooper@gte.net>
• ATM Tube sources
  • From: "Jordan" <jfeder1@netzero.net>
• Re: ATM The most Stupid mistake
  • From: "Joseph O'Neil" <joneil@multiboard.com>
• Re: ATM Whatsa the catch? Inexpensive eye pieces?
  • From: "Joseph O'Neil" <joneil@multiboard.com>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: "Joseph O'Neil" <joneil@multiboard.com>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: "Joseph O'Neil" <joneil@multiboard.com>
• Re: ATM Small Lenses
  • From: "Joseph O'Neil" <joneil@multiboard.com>
• Re: Re ATM Routing
  • From: "Joseph O'Neil" <joneil@multiboard.com>
• Re: ATM spider vanes
  • From: "Joseph O'Neil" <joneil@multiboard.com>
• Re: ATM Re: Faster Mirror Cooling - thermo electric "Peltier Devices"
  • From: Juan Herrero <jherrero@videotron.ca>
• Re: ATM a little machine shop humor
  • From: Juan Herrero <jherrero@videotron.ca>
• Re: ATM Re: Faster Mirror Cooling - Surplus Peltier Devices
  • From: Juan Herrero <jherrero@videotron.ca>
• Re: ATM Born Again "First Light" (very long)
  • From: Juan Herrero <jherrero@videotron.ca>
• Re: ATM Flat mounting plate for solid tube?
  • From: Juan Herrero <jherrero@videotron.ca>
• Ancient Viking ATMers
  • From: "Justin Kelly" <iustus@home.com>
• ATM vikings: better info
  • From: "Justin Kelly" <iustus@home.com>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: "Justin Kelly" <iustus@home.com>
• ATM More Newbie Help
  • From: "Karl Fittinger" <karlfitt@hotmail.com>
• ATM More newbie help
  • From: "Karl Fittinger" <karlfitt@hotmail.com>
• ATM Painting a Yazoo Mills tube
  • From: "KEATING, RONALD J" <RKEATI1@entergy.com>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: Ken & Teresa Lilja <klilja@atl.mediaone.net>
• Re: ATM Waineo machine question
  • From: Ken & Teresa Lilja <klilja@atl.mediaone.net>
• ATM Diagonal Size Part Two
  • From: Ken A Berthelot <berthelot@juno.com>
• ATM list
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM The most Stupid mistake
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM: Keeping Dust off
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM: Cutting Glass Circles
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM :My Cass'a'grin Project :Secondary Support
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Reject fused quartz- Weight per blank
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Not getting anywhere!
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM How can I tell last grit used?
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM: What does Texereau Know?
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Figuring mirror - HELP!! (how to)
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM How can I tell last grit used?
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM How can I tell last grit used?
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Refractor Lens
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Re: Faster Mirror Cooling - thermo electric "Peltier Devices"
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Re: Faster Mirror Cooling - thermo electric "PeltierDevices"
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Waineo machine question
  • From: Ken Hunter <kb7h@ccaonline.com>
• ATM neat stuff
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Delrin and Aluminum Spherometers.
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM polishing
  • From: Ken Hunter <kb7h@ccaonline.com>
• ATM eBay Alert
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM OT: New Large Mirror on EBAY
  • From: Ken Hunter <kb7h@ccaonline.com>
• ATM Re: silicosis prevention?
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Rotating upper cage
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Best secondary size???
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM OTA diameter, was rotating upper cage
  • From: Ken Hunter <kb7h@ccaonline.com>
• RE: ATM - Starting Over
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATMer's in Central Ohio??
  • From: Ken Hunter <kb7h@ccaonline.com>
• ATM Can't get in...
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM spider vanes
  • From: Ken Hunter <kb7h@ccaonline.com>
• ATM eBay item
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Can't get in...
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Can't get in...
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM HELP!!! FIGURING HELP POLISHING!!!
  • From: Ken Hunter <kb7h@ccaonline.com>
• ATM test
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM : My Cass'a'grin Project: Secondary support
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM sub-arcsec micrometer precision
  • From: Ken Hunter <kb7h@ccaonline.com>
• ATM vacuum chamber configuration
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM vacuum chamber configuration
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM coring a mirror blank
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Diagonal Size Part Two
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM 8", focal length advice needed
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM How many strokes per minute
  • From: Ken Hunter <kb7h@ccaonline.com>
• Re: ATM Whatsa the catch? Inexpensive eye pieces?
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Mirror making lessons in N/E Ohio?
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM eyepieces-foclalengths v observation requirements
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Pitch Lap Help
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Sending system files
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Formica Method -- was, Glue for..?
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM remote operation of amateur observatories
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Formica Method -- was, Glue for..?
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Small Lenses
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM glass pouring
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Atmlist, how to change back from single to digest format?
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Rotating upper cage
  • From: Ken Lowther <lowther@worldnet.att.net>
• ATM linux/live foucault
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM linux/live foucault
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Gallo's humour
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Can't get in...
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM linux/live foucault
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Tremendous eye relief...?!
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Pre-polishing Question
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM How to make a spherometer?
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Large blank suppliers.cont...
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM POLISHING PADS
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM How to make a spherometer?
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM more newbie help
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM Star Testing
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM TDE gone, but a hole appears
  • From: Ken Lowther <lowther@worldnet.att.net>
• Re: ATM 8", focal length advice needed
  • From: Ken Lowther <lowther@worldnet.att.net>
• ATM Atmlist, how to change back from single to digest format?
  • From: Kenn Lynch <klynch1@seeyouonline.com>
• ATM how to attach the secondary
  • From: "Klaas Honders" <k.honders@worldonline.nl>
• Re: ATM 8 inch achromat
  • From: "Klaas Honders" <k.honders@worldonline.nl>
• Re: ATM Sub-aperature corrector Maksutov
  • From: "Klaas Honders" <k.honders@worldonline.nl>
• Re: ATM Achromat Design and Implementation
  • From: "Klaas Honders" <k.honders@worldonline.nl>
• Re: ATM Setting Circles
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Star Test
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Star Test
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Star Test
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Setting Circles
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Star Test
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Tube currents, air density, etc. (was ATM: Keeping Dust off)
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM 16" blank thickness extended question
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM: Keeping Dust off
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Expansion calc. Deformation in mirrors as a function of thickness variation to delta temp
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM eyepieces-foclalengths v observation requirements
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM thoughts on scope temperature
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Focuser Baffle
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• RE: ATM Focuser Baffle
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• ATM Spider hub twisting (was: Aluminium truss structures)
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM daylight planets
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Spiders (diffraction)
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• RE: ATM - Starting Over
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• RE: ATM spider vanes
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• ATM RE: Help with star test results
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• RE: ATM spider vanes
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• Re: ATM Questions from newbie ATM'er (relatively long)
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• ATM Good seeing...finally!
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• RE: ATM foucault/ronchi questions on mirror
  • From: Krajci Tom J Maj 27OSS/IN <Tom.Krajci@cannon.af.mil>
• ATM Telescope/Optics Workshop report
  • From: "Kreig McBride" <kmcbride@memes.com>
• Re: ATM Fusing plate glass
  • From: "Kreig McBride" <kmcbride@memes.com>
• Re: ATM: What does Texereau Know?
  • From: KWhitefire@aol.com
• ATM A Test Method
  • From: KWhitefire@aol.com
• ATM Where to get DOS and Windoze diskettes: was 386...
  • From: KWhitefire@aol.com
• ATM Sending system files
  • From: KWhitefire@aol.com
• ATM 386 notebooks and where to get DOS
  • From: KWhitefire@aol.com
• ATM Casscalc update
  • From: KWhitefire@aol.com
• Re: ATM Keeping Dust Off
  • From: Larry Arnold <larry19@home.com>
• Re: ATM Keeping Dust Off
  • From: Larry Arnold <larry19@home.com>
• Re: ATM aluminum bending
  • From: Larry Arnold <larry19@home.com>
• Re: ATM aluminum Routing
  • From: Larry Arnold <larry19@home.com>
• Re: ATM figuring advice
  • From: Larry Blair <lbblair1@yahoo.com>
• ATM Mirror making lessons in N/E Ohio?
  • From: Lawrence Sayre <lsayre@stratos.net>
• ATM reference sources for sub dia. tool
  • From: Lawrence Sayre <lsayre@stratos.net>
• Re: Re[2]: ATM aluminum Routing
  • From: "Lenord Stage" <lenordstage@home.com>
• Re: ATM Best wood for Dob mount
  • From: "Lenord Stage" <lenordstage@home.com>
• Re: ATM Regarding light traveling through air.
  • From: "Leonard Tramiel" <leonard@tramiel.org>
• ATM carbon fiber tubes
  • From: "leondf" <leondf@ix.netcom.com>
• Re: ATM The most Stupid mistake
  • From: lifedata@vol.com
• Re: ATM Glue for Formica?
  • From: lifedata@vol.com
• Re: ATM spider vanes
  • From: lifedata@vol.com
• ATM Good news
  • From: lifedata@vol.com
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
• Re: ATM Dew problems? / Newbie question...
  • From: "Mark Alsing" <malsing@borg.ae.usr.com>
• Re: ATM Dew problems? / Newbie question...
  • From: "Mark Alsing" <malsing@borg.ae.usr.com>
• Re: ATM Building CCD cameras
  • From: "Mark D. Weinberg" <mweinberg@wavemark.com>
• Re: ATM Building CCD cameras
  • From: "Mark D. Weinberg" <mweinberg@wavemark.com>
• ATM Mel's system on a Losmandy G-11
  • From: Mark Squicquero <canf_ms@ACCESS-K12.org>
• ATM Ideas for stripping formica from side bearings...
  • From: "Mark VandeWettering" <markv@pixar.com>
• ATM Achromat Design and Implementation
  • From: "Mark VandeWettering" <markv@pixar.com>
• Re: ATM Mirror figuring truly random
  • From: "Mark VandeWettering" <markv@pixar.com>
• Re: Questions from newbie ATM'er (relatively long)
  • From: "Mark VandeWettering" <markv@pixar.com>
• Re: ATM Best wood for Dob mount
  • From: "Mark VandeWettering" <markv@pixar.com>
• Re: ATM How to make a spherometer?
  • From: "Mark VandeWettering" <markv@pixar.com>
• Re: ATM Artifical Star test.
  • From: "Mark VandeWettering" <markv@pixar.com>
• ATM Plaster tools
  • From: "Martti Koskimo" <marakos@saunalahti.fi>
• ATM The Poor Mans Curve Generator
  • From: "Martti Koskimo" <marakos@saunalahti.fi>
• ATM The Poor Mans Curve Generator
  • From: "Martti Koskimo" <marakos@saunalahti.fi>
• ATM The Poor Mans Curve Genetaror
  • From: "Martti Koskimo" <marakos@saunalahti.fi>
• Re: ATM online astronomy calculators
  • From: maruska@posam.sk
• Re: ATM More mathematics
  • From: maruska@posam.sk
• Re: ATM threaded inserts
  • From: maruska@posam.sk
• ATM Off Subject - Where to find astronomy/commercial telescope Email list?
  • From: "Marv De Beque" <debequem@gemair.com>
• ATM Re: eyepiece focal lengths v observ. requirements
  • From: marz27@juno.com
• ATM Re: Thinking Ahead
  • From: marz27@juno.com
• ATM Re: Crayford Focuser & rubber tubing
  • From: marz27@juno.com
• Re: ATM more newbie help
  • From: marz27@juno.com
• Re: ATM more newbie help
  • From: marz27@juno.com
• Re: ATM How to make a spherometer?
  • From: matt@considine.net
• ATM To Do List
  • From: MattFasano@aol.com
• ATM Kit Costs for 12"
  • From: MattFasano@aol.com
• ATM Thinking Ahead
  • From: MattFasano@aol.com
• ATM Focal Ratio help
  • From: MattFasano@aol.com
• Fwd: ATM Focal Ratio help
  • From: MattFasano@aol.com
• Fwd: ATM Focal Ratio help
  • From: MattFasano@aol.com
• ATM Choosing a focuser
  • From: MattFasano@aol.com
• Re: ATM Choosing a focuser
  • From: MattFasano@aol.com
• RE: ATM Manual & motorized
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Hyperbola problem
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Odd spam
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM 1/4" thick too thin for 4.5" mirror?
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Mel's system on a Losmandy G-11
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM FIGURING FOR THE FIRST TIME
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM 26" BVC blank
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Need Stepper Motor Driver Trouble Shooting Device
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM RE: What does Texereau Know?
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Seeking Richard Schwartz
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Expansion calc. What is the best use of active cooling?
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM the secondary mirror,
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM one way to test mirror cooling ideas
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM what is it?
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Waineo machine question
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM More mathematics
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM telescope pictures
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM please end OT posts, msg from list owner
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Focuser Baffle
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Spider hub twisting (was: Aluminium truss structures)
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Puzzled about the limiting magnitude of the eye.....
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM world's longest telescope
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Edge Chips on Blank and False Ideas]
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Excel-lent scope control?
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Beseler
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM The future is here
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM pouring glass blanks help
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM truss bending calculations (long)
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Help with star test results
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM help deciphering
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM polishing 24" taking a long time
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM eBay item
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Pre-polishing Question
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM list ower comments on the Geoff Gallo thread
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Thanks! Re: Mirror Polishing & Lap Questions
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Can't get in...
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM list owner statement
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Aluminum, Split Ring, Astrograph
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Aluminum, Split Ring, Astrograph
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: RE: ATM Aluminum, Split Ring, Astrograph
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Aluminum, Split Ring, Astrograph
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Aluminum, Split Ring, Astrograph
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Aluminum, Split Ring, Astrograph
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM correction of Ronchi lines is causing rings
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM f ratio
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM sub-arcsec micrometer precision
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: Coma vs Figure - Was: Re: ATM f ratio
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM Audine CCD and Mel's alt/az software
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM fwd msg on coma
  • From: "Mel Bartels" <mbartels@efn.org>
• RE: ATM TDE gone, but a hole appears
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM How can I tell last grit used?
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Corrector Plate Coating Removal
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Pitch Lap Help
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Mirror polishing and pitch lap questions
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Best wood for Dob mount
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Mixed Pitch?
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM More Newbie Help
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Tube sources
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM More Newbie Help
  • From: Michael Coslo <mjc5@psu.edu>
• Re: Re ATM Blinking Finderscope
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM Cleaner
  • From: Michael Coslo <mjc5@psu.edu>
• Re: ATM The Poor Mans Curve Generator
  • From: Michael Coslo <mjc5@psu.edu>
• ATM Sandblasting mirrors
  • From: Michael Coslo <mjc5@psu.edu>
• ATM Re: atm-digest V1 #2068
  • From: Michael Lindner <mikel@att.net>
• ATM discussion board
  • From: Michael Lindner <mikel@att.net>
• Re: ATM How to make a spherometer?
  • From: Michael Lindner <mikel@att.net>
• Re: ATM threaded inserts
  • From: Michael Lindner <mikel@att.net>
• Re: Re ATM Blinking Finderscope
  • From: Michael Lindner <mikel@att.net>
• Re: ATM The Poor Mans Curve Generator
  • From: Michael Lindner <mikel@att.net>
• Re: ATM Star Testing
  • From: Michael Lindner <mikel@att.net>
• Re: ATM public observatory was Cassegrain formulae
  • From: Michael Peck <mpeck1@ix.netcom.com>
• ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM Wynne corrector
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM Re: remote control observatory
  • From: Michael Sallman <msallman@pro-ns.net>
• Re: ATM Rotating upper cage
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Rotating upper cage
  • From: spooner@page.az.net (Michael Spooner)
• Re: ATM Rotating upper cage
  • From: spooner@page.az.net (Michael Spooner)
• ATM 22" primary cell / 27 points triangles - Anyone interested?
  • From: Michel <lx50@videotron.ca>
• Re: ATM aluminum Routing
  • From: Michel <lx50@videotron.ca>
• ATM in Milton Keynes
  • From: "Mike Broughton" <mikebroughton@freeuk.com>
• Re: ATM Here we go again. Another big mirror....
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Not getting anywhere!
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM: What does Texereau Know?
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Off topic posts....
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM remote operation of amateur observatories (Winer Observatory)
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Plaster of paris tools
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Gallo's humour
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Gallo's humour
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Fortuitous Find + an OT ?
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Sandblasting mirrors
  • From: Mike Coslo <mjc5@psu.edu>
• ATM The most stupid mistake
  • From: "Mike Salmon" <mike_oddlycalm@talk21.com>
• Fw: ATM-The most stupid mistake
  • From: "Mike Salmon" <mike_oddlycalm@talk21.com>
• Re: ATM PIVOT BOLT troubles.
  • From: Mimas@aol.com
• ATM annealing
  • From: "MkUltra \\Robert Wilson\\" <Aurora@ix.netcom.com>
• ATM day star filters
  • From: "MkUltra \\Robert Wilson\\" <Aurora@ix.netcom.com>
• ATM OT: astronomy log
  • From: "n.rimmer@btinternet.com" <n.rimmer@btinternet.com>
• ATM online astronomy calculators
  • From: "n.rimmer@btinternet.com" <n.rimmer@btinternet.com>
• Re: ATM Focal plane
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Star Test
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM: Keeping Dust off
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Making baffles out'a masonite??
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Making baffles out'a masonite??
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• SV: ATM Puzzled about the limiting magnitude of the eye.....
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• ATM Re: Crayford focuser
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• SV: ATM Puzzled about the limiting magnitude of the eye.....
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Rotating upper cage
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• SV: ATM Rotating upper cage
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• SV: ATM Rotating upper cage
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Rotating upper cage
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• ATM Dave Rowe's Figure34 - a modern Foucault data reduction program
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• SV: ATM Best wood for Dob mount
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Unsquare focusers
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Dew problems? / Newbie question...
  • From: "Olle Eriksson" <oeriksson@home.se>
• SV: ATM: What does Texereau Know?
  • From: "Olle Eriksson" <oeriksson@home.se>
• SV: ATM eyepieces-foclalengths v observation requirements
  • From: "Olle Eriksson" <oeriksson@home.se>
• RE: ATM Threads in Al box section?
  • From: Paul LeFevre <paull@lucasarts.com>
• RE: ATM Glue for Formica?
  • From: Paul LeFevre <paull@lucasarts.com>
• RE: ATM new dob !
  • From: Paul LeFevre <paull@lucasarts.com>
• RE: ATM Beseler
  • From: Paul LeFevre <paull@lucasarts.com>
• RE: Questions from newbie ATM'er (relatively long)
  • From: Paul LeFevre <paull@lucasarts.com>
• ATM Going off-list
  • From: Paul LeFevre <paull@lucasarts.com>
• Re: ATM in Milton Keynes
  • From: "PaulKaminski" <PaulKaminski@tesco.net>
• ATM remote operation of amateur observatories
  • From: Peter Abrahams <telscope@europa.com>
• ATM Re: SBIG Hartmann program
  • From: Peter Chen <chen@stars.gsfc.nasa.gov>
• ATM Re: Shuttle heat tiles
  • From: Peter Chen <chen@stars.gsfc.nasa.gov>
• Re: ATM Encoders?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM The most Stupid mistake
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM The most Stupid mistake
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Threads in Al box section?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Sub-aperature corrector Maksutov
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Muffin Fans - an AC fan in 12v DC ?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM TRO Hyper-link
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Muffin Fans - an AC fan in 12v DC ?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM TRO Hyper-link
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM TRO Hyper-link
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Any Links to - "Foam" to use for camera and telescope equip.
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM a little machine shop humor
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Date: Tue, 11 Apr 2000 14:21:36 +0200
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Waineo Machine
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Build/Design of a Kiln.
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Zirconium Oxide
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM - Kiln Design
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Zirconium Oxide - rouge
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Re: 386 laptops and dead batteries
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Re: 386 laptops and dead batteries
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Metal Tube for a 10" Dob.
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM aluminum bending
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Aluminium truss structures.
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM PIVOT BOLT troubles.
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Re: quartz...
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Begging for science / foucault question
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Aluminium truss structures.
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM remote operation of amateur observatories (Winer Observatory)
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM aluminum Routing
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM Re: Spiders (geometry)
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM remote operation of amateur observatories (Winer Observatory)
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Excel-lent scope control?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM Re:
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM - Starting Over - Now metal tools
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Can't get in...
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Aluminum, Split Ring, Astrograph
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM How to make a spherometer?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Large blank suppliers.cont...
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM How to make a spherometer?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM How to make a spherometer?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Glass dust filters
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Hardwood vs. Softwoods
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM sub-arcsec micrometer precision
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Hardwood vs. Softwoods
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: Re Was: ATM Plywood/Hardwood/Softwood
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM vacuum chamber configuration
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM CAD: slightly off topic
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Mel's alt/az software
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM The most Stupid mistake
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: Review of GTO Eyepiece: Was ATM Whatsa the catch? Inexpensive eye pieces?
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Star Test
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Muffin Fans
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Zirconium Oxide - rouge
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Puzzled about the limiting magnitude of the eye.....
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM help deciphering - Shearing Interferometer
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: Re:ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• ATM Remote help - Ronchi v Foucault
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM aluminum Routing
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Tremendous eye relief...?!
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Determining the index of refraction of glass
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Setting Circles/Worst Mistake
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re: ATM Re: Crayford focuser
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re ATM Routing
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re ATM Routing
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re ATM Plywood/Hardwood/Softwood
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re: Re ATM Plywood/Hardwood/Softwood
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re ATM Plywood/hardwood/softwood
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re ATM Blinking Finderscope
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re ATM Threaded Inserts
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re ATM Blinking Finderscope
  • From: "Peter Jones" <pmjco@email.msn.com>
• Re: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: PK6811S@ACAD.DRAKE.EDU
• ATM Figuring/Testing my 8" f8
  • From: PK6811S@ACAD.DRAKE.EDU
• Re: ATM Figuring/Testing my 8" f8
  • From: PK6811S@ACAD.DRAKE.EDU
• Re: ATM - Kiln Design
  • From: "Poul Linnet" <kam1842@vip.cybercity.dk>
• ATM Expansion calc.
  • From: dosc@CSWNET.COM (Raymond A. Desmarais Jr.)
• ATM Copier lens and mirror
  • From: "Reed Spaulding" <shellac@together.net>
• ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: "Reed Spaulding" <shellac@together.net>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: "Reed Spaulding" <shellac@together.net>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: "Reed Spaulding" <shellac@together.net>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: "Reed Spaulding" <shellac@together.net>
• Re: ATM Flatter than Flat Paaint - NEW DISCOVERY
  • From: "Reed Spaulding" <shellac@together.net>
• ATM correction of Ronchi lines is causing rings
  • From: "Reed Spaulding" <shellac@together.net>
• Re: ATM threaded inserts
  • From: "Reed Spaulding" <shellac@together.net>
• Re: ATM correction of Ronchi lines is causing rings
  • From: "Reed Spaulding" <shellac@together.net>
• ATM It Worked! Thanks to everyone
  • From: "Reed Spaulding" <shellac@together.net>
• Re: ATM Fortuitous Find + an OT ?
  • From: "Reed Spaulding" <shellac@together.net>
• ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: "rguinamard" <rguinamard@infonie.fr>
• Re: ATM cellular mirrors
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM polishing 24" taking a long time
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• ATM Audine CCD and Mel's alt/az software
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM 16" blank thickness extended question
  • From: Ricardo Dunna <rdunna@infolink.com.br>
• ATM: Cutting Glass Circles
  • From: "Richard Andersen" <RichardA@island.net>
• Re: ATM expansion tables
  • From: "Richard Andersen" <RichardA@island.net>
• Re: ATM - Kiln Design
  • From: "Richard Andersen" <RichardA@island.net>
• Re: ATM Mirror coatings/ mirror polishing
  • From: "Richard Andersen" <RichardA@island.net>
• ATM aluminum Routing
  • From: "Richard Andersen" <RichardA@island.net>
• Re: ATM truss bending calculations (long)
  • From: "Richard Andersen" <RichardA@island.net>
• ATM Flame Wars
  • From: "Richard Andersen" <RichardA@island.net>
• ATM Hardwood vs. Softwoods
  • From: "Richard Andersen" <RichardA@island.net>
• ATM Here we go again. Another big mirror....
  • From: "Richard Ozer" <rozer@ois-online.com>
• RE: ATM the secondary mirror,
  • From: Richard Ozer <rozer@ois-online.com>
• RE: ATM HELP!!! FIGURING HELP POLISHING!!!
  • From: Richard Ozer <rozer@ois-online.com>
• RE: ATM Best wood for Dob mount
  • From: Richard Ozer <rozer@ois-online.com>
• RE: ATM Mixed Pitch?
  • From: Richard Ozer <rozer@ois-online.com>
• RE: ATM Vertical Axis Bearings
  • From: "Richard Rovelstad" <Richard.Rovelstad@worldnet.att.net>
• FW: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: "Richard Rovelstad" <Richard.Rovelstad@worldnet.att.net>
• ATM - Monochromatic Light
  • From: Richard Schwartz <richas@idt.net>
• ATM Edge Chips on Blank and False Ideas
  • From: Richard Schwartz <richas@idt.net>
• ATM - Kiln Design
  • From: Richard Schwartz <richas@idt.net>
• ATM - Starting Over
  • From: Richard Schwartz <richas@idt.net>
• ATM - Best Secondary Size
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM Tremendous eye relief...?!
  • From: Rob Teeter <webuser@thecore.com>
• Re: ATM Lowest power eyepiece/focaser problems?
  • From: Rob Teeter <webuser@thecore.com>
• Re: ATM - Polishing & Pitch Lap Questions
  • From: "robert allen" <rallen@iland.net>
• Re: ATM Formica Method - Inexpensive Hose Clamps
  • From: "Robert C. Santore" <santore@attglobal.net>
• ATM Solar Filter, etc.
  • From: Robert Norgard <rnorgard@gci.net>
• Re: ATM Star Test
  • From: Robert Norgard <rnorgard@gci.net>
• ATM Scope Pictures
  • From: Robert Norgard <rnorgard@gci.net>
• Re: ATM Threads in Al box section?
  • From: Robert Norgard <rnorgard@gci.net>
• Re: ATM Ideas for stripping formica from side bearings...
  • From: Robert Norgard <rnorgard@gci.net>
• Re: Re ATM Routing
  • From: Robert Norgard <rnorgard@gci.net>
• Re: ATM More Newbie Help
  • From: Robert Norgard <rnorgard@gci.net>
• Re: ATM Flat mounting plate for solid tube?
  • From: Robert Norgard <rnorgard@gci.net>
• Re: ATM Metal Tube for a 10" Dob.
  • From: "Roger A. Phillips" <mailman@localline.com>
• ATM Had a Pup Tonight!
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM Red Herrings and Little Dogs
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM 8 inch achromat
  • From: Roger West <westr@mail.nsuok.edu>
• Re: ATM 8 inch achromat
  • From: Roger West <westr@mail.nsuok.edu>
• ATM 8 inch achromat
  • From: Roger West <westr@mail.nsuok.edu>
• Re: ATM 26" BVC blank
  • From: "Ron Dyvig" <rondyv@gwtc.net>
• Re: ATM Works every time
  • From: "Ron Dyvig" <rondyv@gwtc.net>
• Re: ATM f ratio
  • From: "Ron Dyvig" <rondyv@gwtc.net>
• Re: ATM f ratio
  • From: "Ron Dyvig" <rondyv@gwtc.net>
• Re: ATM Regarding light speed.
  • From: Ron Gubbins <scubadude@mediaone.net>
• Re: ATM Keeping Dust Off
  • From: Ron Gubbins <scubadude@mediaone.net>
• Re: ATM Flat Black Paint
  • From: Ron Gubbins <scubadude@mediaone.net>
• Re: ATM threaded inserts
  • From: Ron Gubbins <scubadude@mediaone.net>
• ATM: cutting glass with ultrasonic CNC mill
  • From: Ronald Newman <ronaldn@ptd.net>
• Re:ATM crayford focuser
  • From: Ronald Newman <ronaldn@ptd.net>
• Re: ATM truss bending calculations (long)
  • From: "Roy Diffrient" <diffrent@bcpl.net>
• ATM_CORRECTION_Error in Truss Deflection Calculations
  • From: "Roy Diffrient" <diffrent@bcpl.net>
• ATM Hardwood vs. Softwoods
  • From: "Roy Diffrient" <diffrent@bcpl.net>
• Re: ATM BASIC QUESTION
  • From: "Russell Volz" <Russell_Volz@email.msn.com>
• Re: ATM BASIC QUESTION
  • From: "Russell Volz" <Russell_Volz@email.msn.com>
• Re: ATM BASIC QUESTION
  • From: "Russell Volz" <Russell_Volz@email.msn.com>
• ATM Parabolizing... sorta..
  • From: Ryan Hess <atmryan@excite.com>
• ATM Horrible figure!
  • From: Ryan Hess <atmryan@excite.com>
• Re: ATM TRO Hyper-link
  • From: Ryan Hess <atmryan@excite.com>
• ATM 10" update on figuring
  • From: Ryan Hess <atmryan@excite.com>
• Re: ATM Need Stepper Motor Driver Trouble Shooting Device
  • From: Ryan Hess <atmryan@excite.com>
• ATM Not getting anywhere!
  • From: Ryan Hess <atmryan@excite.com>
• ATM Pitch Brand Suggestions?
  • From: Ryan Hess <atmryan@excite.com>
• Re: ATM Re: Faster Mirror Cooling - thermo electric"PeltierDevices"
  • From: "Sam Michael" <samm@idcomm.com>
• ATM Build/Design of a Kiln.
  • From: "Sam Michael" <samm@idcomm.com>
• ATM Notebook Computers UPDATE.
  • From: "Sam Michael" <samm@idcomm.com>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: "Sam Michael" <samm@idcomm.com>
• ATM Delrin and Aluminum Spherometers.
  • From: "Sam Michael" <samm@idcomm.com>
• ATM Kiln for precision annealing.
  • From: "Sam Michael" <samm@idcomm.com>
• Re: ATM How to make a spherometer?
  • From: "Sam Michael" <samm@idcomm.com>
• ATM 386 Notebook Computers SHIPPED. Sorry about delay.
  • From: "Sam Michael" <samm@idcomm.com>
• Re: ATM vacuum chamber configuration
  • From: "Sam Michael" <samm@idcomm.com>
• ATM Notebook Computers. Center is +12 Volts.
  • From: "Sam Michael" <samm@idcomm.com>
• Re: ATM Too Thin?
  • From: "Sam Orawski" <orawski@lara.on.ca>
• Re: ATM Too Thin?
  • From: "Sam Orawski" <orawski@lara.on.ca>
• re:ATM TRO Hyperlink
  • From: "Sam Orawski" <orawski@lara.on.ca>
• Re: ATM Commercial Mirror Cells...
  • From: "Sam Orawski" <orawski@lara.on.ca>
• Re: ATM Help with star test results
  • From: "Sam Orawski" <orawski@lara.on.ca>
• Re Was: ATM Plywood/Hardwood/Softwood
  • From: Scott Milligan <starzkey@banet.net>
• ATM CAD: slightly off topic
  • From: "Scott Neuman" <scott_neuman@hotmail.com>
• ATM elliptical flats
  • From: "Scott Neuman" <scott_neuman@hotmail.com>
• Re: ATM elliptical flats
  • From: "Scott Neuman" <scott_neuman@hotmail.com>
• Re: ATM backwards ronchi
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM Re: quartz...
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM Focuser Baffle
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM Baffles between secondary and eyepiece
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM OT: New Large Mirror on EBAY
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM Small Lenses
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM Quartz Blank Prices
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM Wire spiders...again
  • From: "semi hemi" <semihemi@hotmail.com>
• Re: ATM Metal Tube for a 10" Dob.
  • From: "Shane LaPierre" <shanelapierre@dellnet.com>
• ATM cellular mirrors
  • From: "Shane LaPierre" <shanelapierre@dellnet.com>
• Re: ATM Finished 8"
  • From: Shane_Lapierre@AICI.COM
• Re: ATM Focal Ratio help
  • From: Shane_Lapierre@AICI.COM
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: Shane_Lapierre@AICI.COM
• Re: ATM aluminum Routing
  • From: Shane_Lapierre@AICI.COM
• ATM Got Grit?
  • From: Shane_Lapierre@AICI.COM
• RE: ATM new dob !
  • From: Shane_Lapierre@AICI.COM
• Re: ATM Secondary flatness...
  • From: Shane_Lapierre@AICI.COM
• Re: ATM Rotating upper cage
  • From: Shane_Lapierre@AICI.COM
• ATM Starting over...
  • From: Shane_Lapierre@AICI.COM
• Re: ATM Starting over...
  • From: Shane_Lapierre@AICI.COM
• Re: ATM truss bending calculations (long)
  • From: Shane_Lapierre@AICI.COM
• Re: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: Shane_Lapierre@AICI.COM
• Re: ATM Unsquare focusers
  • From: Shane_Lapierre@AICI.COM
• Re: ATM CAD: slightly off topic
  • From: Shane_Lapierre@AICI.COM
• ATM Seeking Richard Schwartz
  • From: "Sidor . Kurt" <KSidor@drc.com>
• ATM SCT Threads
  • From: "Sidor . Kurt" <KSidor@drc.com>
• Re: ATM dielectric mirrors
  • From: "Spencer Roedder" <roedder@roedder.com>
• Re: ATM Star Test
  • From: "Spencer Roedder" <roedder@roedder.com>
• RE: ATM Star Test
  • From: "Spencer Roedder" <roedder@roedder.com>
• Re: ATM truss bending calculations (long)
  • From: "Spencer Roedder" <roedder@roedder.com>
• Re: ATM Odd spam
  • From: "Stanley A. Gorodenski" <stanlep@gateway.net>
• ATM: Keeping Dust off
  • From: "Stanley A. Schultz" <schultz@ucalgary.ca>
• Re: ATM: Keeping Dust off
  • From: "Stanley A. Schultz" <schultz@ucalgary.ca>
• ATM I wish I had a dollar for every virus story...
  • From: "Stanley A. Schultz" <schultz@ucalgary.ca>
• ATM Rotating upper cage
  • From: "Starman Dan" <charlesdoyle@hotmail.com>
• ATM OTA diameter, was rotating upper cage
  • From: "Starman Dan" <charlesdoyle@hotmail.com>
• RE: ATM eyepieces-foclalengths v observation requirements
  • From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
• RE: ATM the secondary mirror,
  • From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
• RE: ATM list owner statement
  • From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
• Re: ATM Odd spam
  • From: "Stephen F. Murray" <sfm@home.net>
• Re: ATM Odd spam
  • From: "Stephen F. Murray" <sfm@home.net>
• Re: ATM Odd spam
  • From: "Stephen F. Murray" <sfm@home.net>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: "Stephen F. Murray" <sfm@home.net>
• Re: ATM measures
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Setting Circles
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM The most Stupid mistake
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Setting Circles
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: Ancient Viking ATMers
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Any Links to - "Foam" to use for camera and telescope equip.
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• DOS Issues (was: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM POLISHING PADS
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM f ratio
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM Refractor Lens
  • From: "Ted Agos" <tagos@holycross.edu>
• Re: ATM Odd spam
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM: Keeping Dust off
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: Vikings were ATMs ?
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM TRO Hyper-link
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM TRO Hyper-link
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Keeping Dust Off
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Keeping Dust Off
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM How can I tell last grit used?
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Flat Black Paint
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Metal Tube for a 10" Dob.
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Re: 386 laptops and dead batteries
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: The Silent Observer <silent1@ix.netcom.com>
• ATM Re: 386 laptops and R/C Flying
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Beseler
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM wire spider
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM spider vanes
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM linux/live foucault
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Plaster of paris tools
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Determining the index of refraction of glass
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM more newbie help
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: Re ATM Blinking Finderscope
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Help: New TV BinoVue too heavy for my Crayford focuser
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM Diamond hole cutters
  • From: The Silent Observer <silent1@ix.netcom.com>
• Re: ATM coring a mirror blank
  • From: The Silent Observer <silent1@ix.netcom.com>
• ATM Best secondary size???
  • From: "The Wenz Family" <wenzfamily@hotmail.com>
• ATM Shelf Life of Pitch
  • From: "The Wenz Family" <wenzfamily@hotmail.com>
• ATM 8", focal length advice needed
  • From: "The Wenz Family" <wenzfamily@hotmail.com>
• Re: ATM Here we go again. Another big mirror....
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM Here we go again. Another big mirror....
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM BASIC QUESTION
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM Whatsa the catch? Inexpensive eye pieces?
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM Whatsa the catch? Inexpensive eye pieces?
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM TRO Hyper-link
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM 16" blank thickness extended question
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM 100 Inch Mirror?
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM Works every time
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM HELP!!! FIGURING HELP POLISHING!!!
  • From: "Thomas A. Moulton" <w2vy@xanthus.net>
• Re: ATM Works every time
  • From: "Thomas J Diehl" <TJDCDS@FIASTL.NET>
• Re: ATM Reject fused quartz- Weight per blank
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• ATM Cassegrain formulae
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Cassegrain formulae
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Cassegrain formulae
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Cassegrain formulae
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM public observatory was Cassegrain formulae
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Cassegrain formulae
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Small Schmidt Cass
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM public observatory was Cassegrain formulae
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Waineo Machine
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• ATM Right angle finder, convertion to.....
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM what is it?
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Build/Design of a Kiln.
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• ATM Glass molds for casting/slumping blanks...
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Delrin and Aluminum Spherometers.
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM glass pouring
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Re: Reject fused quartz
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM spider vanes
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: Re[2]: ATM Is the 4 truss tube the future of fast-lightweight dobs ??
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM HELP!!! FIGURING HELP POLISHING!!!
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Building CCD cameras
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Artifical Star test.
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Fw: ATM Marble Tool for Plate mirror?
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• ATM Diamond hole cutters
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• ATM Building CCD cameras
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: ATM Building CCD cameras
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• ATM Re: atm-digest V1 #2101
  • From: "Thomas W. Frost" <tfrost@aoc.nrao.edu>
• ATM re:free dos site
  • From: "TIM" <stm800@city-net.com>
• ATM (OT) saa1027 datasheet..
  • From: "TIM" <stm800@city-net.com>
• The ATM FAQ has a new home
  • From: Tim and Becky Poulsen <poulsen@netacc.net>
• ATM Help: New TV BinoVue too heavy for my Crayford focuser
  • From: Tim Babb <tbabb@mediaone.net>
• Re: ATM: Keeping Dust off
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM: Keeping Dust off
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM Star Test
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM Expansion calc. What is the best use of active cooling?
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• ATM Telescope thermal equilibrium - another reason for fans
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM A Test Method
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM Edge Chips on Blank and False Ideas
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM Focal Ratio help
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM spider vanes
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• RE: ATM - Starting Over - Now metal tools
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM spider vanes
  • From: "Tom & Lou Krajci" <krajcit@3lefties.com>
• Re: ATM The future is here
  • From: "Tom Glinos" <tg@utstat.toronto.edu>
• Re: ATM OT: New Large Mirror on EBAY
  • From: "Tony" <kb8jvh@reydata.com>
• ATMer's in Central Ohio??
  • From: "Tony" <kb8jvh@reydata.com>
• ATM Thanks for the program
  • From: "Tony" <kb8jvh@reydata.com>
• ATM How many strokes per minute
  • From: "Tony" <kb8jvh@reydata.com>
• ATM Need Stepper Motor Driver Trouble Shooting Device
  • From: "Tony Cecce" <tonycc@exotrope.net>
• Re: ATM Finished 8"
  • From: Torsten Clay <tclay@theriver.com>
• Re: ATM: Crayford focuser (making a flat by hand)
  • From: Torsten Clay <tclay@theriver.com>
• ATM High School Telescope
  • From: "Trevor" <Zaphod42@zxmail.com>
• ATM Plaster of paris tools
  • From: "Trevor" <Zaphod42@zxmail.com>
• Re: Re: ATM Setting Circles/Worst Mistake
  • From: trwalters@mindspring.com
• ATM :My Cass'a'grin Project :Secondary Support
  • From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
• ATM Re: Backwards Ronchi Test
  • From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
• ATM : My Cass'a'grin Project: Secondary support
  • From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
• Re: ATM !! HELP!!! FIGURING HELP POLISHING!!!
  • From: Vegos <yovw@rvi.net>
• Re: ATM Works every time
  • From: Vegos <yovw@rvi.net>
• Re: ATM Works every time
  • From: Vegos <yovw@rvi.net>
• Re: ATM High School Telescope
  • From: "Vero and Lisa Joseph" <joseph@interact.net.au>
• ATM Marble Tool for Plate mirror?
  • From: "Vero and Lisa Joseph" <joseph@interact.net.au>
• Re: ATM Marble Tool for Plate mirror?
  • From: "Vero and Lisa Joseph" <joseph@interact.net.au>
• Re: ATM Marble Tool for Plate mirror?
  • From: "Vero and Lisa Joseph" <joseph@interact.net.au>
• Re: ATM 8 inch achromat
  • From: VirgilAJ@aol.com
• ATM Broken Light Bulbs
  • From: VirgilAJ@aol.com
• ATM TDE gone, but a hole appears
  • From: "W C Bryson" <abeandpatcasa@erols.com>
• ATM Guys
  • From: "W.S. van der Schagt" <frenzyr@writeme.com>
• ATM One more question
  • From: "W.S. van der Schagt" <frenzyr@writeme.com>
• ATM the secondary mirror,
  • From: "W.S. van der Schagt" <frenzyr@writeme.com>
• ATM Anybody from the Netherlands here ?
  • From: "W.S. van der Schagt" <frenzyr@writeme.com>
• ATM Guys
  • From: "W.S. van der Schagt" <frenzyr@writeme.com>
• ATM 12" Meade LX200
  • From: "W.S. van der Schagt" <frenzyr@writeme.com>
• Re: ATM: Keeping Dust off
  • From: w2vy@xanthus.net
• Re: ATM Recent post from Ivan Krasnev ofr MODAS software
  • From: w2vy@xanthus.net
• ATM MODAS - Check before sending...
  • From: w2vy@xanthus.net
• Re: ATM 16" blank thickness
  • From: w2vy@xanthus.net
• ATM Burnishing a newly silvered mirror
  • From: w2vy@xanthus.net
• Re: Re: ATM Zirconium Oxide
  • From: w2vy@xanthus.net
• Re: RE: RE: ATM Aluminum, Split Ring, Astrograph
  • From: w2vy@xanthus.net
• Re: ATM Setting Circles
  • From: Wayne Topa <wtopa@dmcom.net>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: Wayne Topa <wtopa@dmcom.net>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: Wayne Topa <wtopa@dmcom.net>
• Re: ATM 386 Notebook Virus Alert "Empire Monkey.b" virus
  • From: Wayne Topa <wtopa@dmcom.net>
• Re: ATM dielectric mirrors
  • From: Xakxak@aol.com
• ATM Dew problems? / Newbie question...
  • From: Xakxak@aol.com
• Re: ATM Dew problems? / Newbie question...
  • From: Xakxak@aol.com
• Re: ATM the secondary mirror,
  • From: Xakxak@aol.com
• ATM Commercial Mirror Cells...
  • From: Xakxak@aol.com
• ATM Secondary flatness...
  • From: Xakxak@aol.com
• ATM Lowest power eyepiece/focaser problems?
  • From: Xakxak@aol.com
• ATM Flat mounting plate for solid tube?
  • From: Xakxak@aol.com