Re: [APML]: Mirror Lock?

[steves@LAGUNA.EPCC.EDU]

> 
> The method I use to lock the mirror in place is with a #20 4" bolt and nut
> (Meade Scopes).  The bolt/nut is screwed in the same hole used to lock the
> mirror for shipping.  
> 
> I focus the scope with the bolt in and tighten down the nut to lock in the
> focus.  Actually the scope should be slightly out of focus and use the nut
> to perform the final focus.
> 
> Caution:  Do not attempt to turn the focusing knob with the nut tightened.
> You can strip your focusing rod within the scope.  Also always focus in the
> counter clockwise direction.

Thanks, I have a Meade scope and will try your method. 

Just out of curiousity, why focus in the counter clockwise direction?  
You are the second source I have heard this from and am interested to 
know the reasoning for it.