[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: [APML] Epson 2450 and KAMI Fluid (Was: IC1805 in Cassiopeia with a petzval)
Thank you Jim and roland.
I think I will try (for the moment) the "old book" solution but it's not
easy with 6x7 slides.
I had the same problem with my 6x7 camera but I found a GOOD solution: a
120 film without the backing paper. That works very well.
teiva Leroi
http://www.astrosurf.com/leroi
>
>
>
>> >>>>> "Jim" == Jim Janusz <jjanusz@dc.rr.com> writes:
>>
>> Jim> Ouch! Have you tried using a silk cloth to remove the haze?
>> Jim> I routinely do this with the PL3000.
>>
>> I haven't tried a silk cloth; I have used soft cotton and microfiber
>> cloths. I'm not 100% sure the damage is permanent; it could be
>> residue I haven't managed to get off. Is there something special
>> about how silk absorbs the stuff, or is it just that silk is very
soft
>> and has fine fibers?
>>
>
>Nothing special other than it leaves no lint and won't scratch. It
does
>remove most of the film too.
>
>> I've also considered using an alcohol/water solution to clean the
>> surface, but I'm still not sure it's glass. The haze has made me a
>> bit nervous about it.
>
>I'd find out from Epson what type of glass it is. Then you can decide
how
>to clean it.
>
>Jim
>>
>
>> roland
>> --
>> PGP Key ID: 66 BC 3B CD
>> Roland B. Roberts, PhD RL Enterprises
>> roland@rlenter.com 76-15 113th Street, Apt 3B
>> roland@astrofoto.org Forest Hills, NY 11375
>>
>> -- APML Archives at <http://astro.umsystem.edu/apml/> ---
>> Unsubscribe at <majordomo@seds.org>
>>
>
>
>
>-- APML Archives at <http://astro.umsystem.edu/apml/> ---
> Unsubscribe at <majordomo@seds.org>
>
>
>
-- APML Archives at <http://astro.umsystem.edu/apml/> ---
Unsubscribe at <majordomo@seds.org>