Re: [APML] Meade 47M drive corrector wired for an ST-4 [OT?]

["B. Frank Hinson" <2bfrank@charter.net>]

The corrector is wired as per the schematic (on page 3 in the ST-4 manual)
and the pin tables (APPENDIX A). Corrections can be made with the joy stick,
but not the directional buttons on the ST-4. the RA will "short out". The
DEC works fine. Any idea what wrong.
Thanks,
Frank

----- Original Message -----
From: Herm <hermperez@worldnet.att.net>
To: <astro-photo@seds.org>
Sent: Saturday, September 15, 2001 7:23 AM
Subject: Re: [APML] Meade 47M drive corrector wired for an ST-4 [OT?]


> I have not but it should not be difficult.. just bring out the wires going
to
> the pushbuttons out on a connector, set it up in parallel, leave the
original
> wiring intact. The st4 has relay outputs suitable for this.
>
> "B. Frank Hinson" <2bfrank@charter.net>  wrote:
>
> >Has anyone wired a Meade 47M dual axis drive corrector for an ST-4?
> >Thanks in advance,
> >Frank
>
> Herm
> Astropics http://home.att.net/~hermperez
>
> --  APML Archives at <http://astro.umsystem.edu/apml/>  ---
>              Unsubscribe at <majordomo@seds.org>


--  APML Archives at <http://astro.umsystem.edu/apml/>  ---
             Unsubscribe at <majordomo@seds.org>