Re: [APML] Aeroquest focuser-guider?

[George Anderson <georgea@CAM.ORG>]

For $550 I would have expected a better finish on the product. Looks to
be raw surface on the stock and the welds on the OAG port have not been
cleaned up at all. Their photo looks like one taken of an engineering
prototype as opposed to a production model.
Even if they are built to order the marketing photo should be of a truly
finished product.
And allen head socket screws for focuser lock and EP lock are a bit of
overkill.
But maybe I'm just picky.

George Anderson
Montreal Canada

Clear skies and good health

Torsten Clay wrote:
> 
> Anyone seen one of these up close? Unfortunately they don't have much
> information on dimensions, etc on their web page.
> 
> http://www.aeroquest-machining.com/page9.html
> 
> Torsten
> 
> --  APML Archives at <http://astro.umsystem.edu/apml/>  ---
>              Unsubscribe at <majordomo@seds.org>

--  APML Archives at <http://astro.umsystem.edu/apml/>  ---
             Unsubscribe at <majordomo@seds.org>