Custom GEM's... was [Re: [APML] CG5 v/s Advanced CG5]

["Tim Hart" <Tim.Hart@haworth.com>]

Awesome!  Just amazing!   

Your Gears look like the perfect match for a monster GEM!

I found a couple of sites...

While not exactly GEM...
http://bedair.org/ScopeStuff.html
And 
http://www.naples.net/clubs/eas/billfrie.htm 

Still no luck on where to buy Byers gears....hum....

Thanks for the link and let us know how your spare time project comes out!
Tim

>>> astropix@att.net 05/07/03 01:16PM >>>
 Tim...

 Brian Lula had an incredible example at WSP '03... check his site. I *think* 
it's www.heavensglory... or something close to that. Here's a link that I do 
have bookmarked... a British machinist who even makes his own worm gears!

              http://easyweb.easynet.co.uk/~chrish/eqnotes.htm 

 I'm also building a monster GEM in my 'spare' time... little here - little 
there. Got some pics of the process, but haven't scanned/posted them yet. 
Here's a shot of the gears I procurred from Astromart last year... see:

              http://home.att.net/~astropix/12_inch_Byers_gear.html 
                                      and...
                 http://home.att.net/~astropix/18_Byers_gear.html 

 I'm going with a rather spartan design employing precision pillow block 
bearings instead of custom machined bearing housings. What it may lack in high 
frequency dampening it should make up for in heft... all my pieces thus far are 
surplus and scrap, except for the all important worm drives - which were on the 
used market themselves but are both brand new. I'm not going to cheap-out on 
the percision machining though... the RA shaft will be *ground* to it's final 
dimensions... tricky business considering the shaft if Fortal aluminum.

 One of these years I'll add an 'Equipment' page to my site... I'll post an OT 
letter here when I get that far.

 Good Luck on Your Project !!!

 Geoff Powers



--
http://home.att.net/~astropix/ 


> Do you have any links?  I have access to a full machine shop with a machinist 
> friend at the helm :)  I've toyed with the idea of building a nice GEM.
> 
> Any Idea on where to get quality worm gears?
> 
> Thanks,
> Tim
> 
> >>snip
> 
> BTW if your mechanically inclined  you can strike out on your own and build your 
> own mount. I've seen several examples over the last several month's with people 
> who have rolled their own and happily doing AP.
> 
> >>snip
> 
>    Clear Skies
>    Dwight L Bogan
> 
> 
> _______________________________________________
> Astro-Photo mailing list
> Astro-Photo@seds.org 
> http://seds.org/mailman/listinfo/astro-photo 
_______________________________________________
Astro-Photo mailing list
Astro-Photo@seds.org 
http://seds.org/mailman/listinfo/astro-photo


_______________________________________________
Astro-Photo mailing list
Astro-Photo@seds.org
http://seds.org/mailman/listinfo/astro-photo