Re: [APML] Need advice on G-11 components....

[Herm <hermperez@worldnet.att.net>]

That's all you need, I also use some lead blocks to balance out the
camera on the OTA.. Add extra eyepiece locking screws to the 80mm f6
and it should do fine. Also start planning to learn how to do knife
edge focusing and setup a dry gas purge system for 35mm work, don't
forget the heaters to keep all the mirrors and focuser dry. The last
three items can be homemade.

"Robert Gorichanaz" <rmgorichanaz@wi.rr.com>  wrote:

>I have a Vixen R200SS 8" f/4 reflector and a StellarVue 80mm f/6 refractor. 
> Would like to piggy-back the 80mm on the larger scope so I can guide through 
>one whilst imaging through the other.  Will be doing mainly 35mm work with some 
>webcam stuff.  I know an 80mm f/6 isn't the greatest to use as a guide scope, 
>but I'll be pressing my luck getting "ANOTHER telescope ?!?!?!"
>
>
>I know I need the basic G-11 head and tripod, and a universal plate to mount 
>the Vixen rings to.  I'd assume another DUP plate and a pair of guidescope 
>rings as well.  Any other parts you all can suggest?

>-=bob=-

Herm
Astropics http://home.att.net/~hermperez

--  APML Archives at <http://astro.umsystem.edu/apml/>  ---
             Unsubscribe at <majordomo@seds.org>