[APML] kinda' off topic, but

[RGabbert <rgabbert@cox.rr.com>]

hello:

i seem to be having a problem with my flatbed (hp scanjet 6300c)
scanner.  maybe someone has seen this before.  it scans with some
horizontal bars.  the flatbed glass is crystal clean and i have cleaned
the hg bulb.  there are what looks like be some reflector type mirrors
that are a little dirty.  would this make a difference?  i'll take them
out to clean them only if someone thinks (i do) they will make a
difference.  (it'll be a little work, but will do if neccessary.)  i
didn't take a real good look at the way the flatbed works (real busy
right now), so i thought i'd ask for advice first.  i've attached a link

to a blank scan so you can see what i am talking about.  there is a
slight h-bar near the left side and a large h-bar down the right.

any suggestions would be greatly appreciated.

http://home.cox.rr.com/cuda/blank-test.jpg

tia,

--
Ron Gabbert
Amateur Photography  (Under HEAVY construction)
http://home.cox.rr.com/cuda/
rgabbert@cox.rr.com



--  APML Archives at <http://www.system.missouri.edu/apml/>  ---
                Unsubscribe at <majordomo@seds.org>