Re: [APML] ST-4 and CCDSoft v.5

["David B. Toth" <ve3gyq@amsat.org>]

At 05:51 PM 3/14/2003 -0600, Shane Ramotowski wrote:
>Yep,
>
>It guides, but not very well as which-ever axis's correction
>"gets there" first is done for each cycle while the other is
>omitted.
>
>I'll send a note to SBIG this weekend . . .
>
>- Shane

Shane: CCDSoft is a Software Bisque program, so you'd need to contact them.

Having said that, I wrote the driver for the ST4 ...
You should UNCHECK the box that says send simultaneous x and y corrections.

I looked at my code. IF you send simultaneous commands, it will move the 
X-axis first, and then Y.

This code is similar to the code I wrote for the ST6 which seems to work ...

I assume that you calibrated first?

Dave

_______________________________________________
Astro-Photo mailing list
Astro-Photo@seds.org
http://seds.org/mailman/listinfo/astro-photo