[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [APML] Dew prevention on camera lens



Allan,

For those you are not do-it-yourselfers, the Kendrick Dew Remover 
system is a very good way to deal with dew. Just make sure you do not 
use your car's battery, as you don't want to end up stuck in a remote 
place. From the current draw listed on the Kendrick site you can 
calculate the Amp-Hrs needed for a 12V battery to power the Kendrick.  
Or, if you have electric mains available, you can use a 12V power 
supply with a cigarette lighter adapter.

I have used a Kendrick Dew Remover controller with a camera lens and 
12V battery in the Catskills/Hudson Valley region, where the humidity 
gets to 100% by the end of the night. When I haven't had power issues 
(power supply not rated for the amperage, or a failing battery), the 
Kendrick was very good at preventing dew. I now shoot mostly with 
medium format Hasselblads, and the system even keeps the 30mm fish-eye 
clear, when set appropriately. The only issue is getting the setting 
right, as you don't want to heat the lens too much or too little. I am 
experimenting with the new, more sophisticated, controller which is a 
bit more dependent on a good supply of power, which should not be an 
issue with one heater, but I regularly run with 4 or more heaters.

Taras

On Jul 7, 2005, at 1:39 AM, Allan & Julie Whetzel wrote:

> Hello-
>
> I'll be in the high Sierra Nevada in early August and wanted to do 
> some star trail photography while camping. I'll probably go 2-3 hours 
> with some exposures. I have a 28mm Zuiko f3.5 lens & hood on my trusty 
> OM1. I'd like to avoid dew on the lens - so I  was contemplating the 
> purchase of a Kendrick standard controller and as described on their 
> website a "2 inch heater for 2 inch eyepieces, 50mm finders, some 
> camera lenses."
>
> The 28mm Zuiko lens is 2" in diameter so it seems to me this would be 
> the setup I'd want to get. If so - will it keep dew off the camera 
> lens for long exposures? Would I just wrap the heater around the lens 
> as close as possible to where the hood starts?
>
> Any advice from the experienced would be appreciated!
>
> Thanks,
>
> Allan
> _______________________________________________
> Astro-Photo mailing list
> Astro-Photo@seds.org
> http://seds.org/mailman/listinfo/astro-photo
>
>
--
                         <end of message>
******************************************************************
* Taras R. Hnatyshyn                     tarashnat@earthlink.net *
*    http://homepage.mac.com/tarashnat/astrophoto/welcome.html   *
*  73°59'18.4"W 40°43'37.2"N    or    74°25'24.4"W 41°40'42.0"N  *
******************************************************************

_______________________________________________
Astro-Photo mailing list
Astro-Photo@seds.org
http://seds.org/mailman/listinfo/astro-photo