Re: [APML] Hypering psi?

[Grant <GB1029@inter-linc.net>]

Well...the valve cap was plenty tight.  I also made sure
the o-ring was free of grit.  Looks like I'll have to try Bert's
soapy water trick.  If that doesn't reveal the leak...Oh well!
At least I'm not the only one with a leaky oven!

Grant

At 10:43 PM 7/7/02 -0700, you wrote:
>Hi Grant,
>
>definitely a leak of some type.  As it heats it should usually gain
>pressure.  On thing to try is to slightly tighten the small nut that holds
>the valve handle to the valve.  I use Lumicon valves on my tank and I have
>to tighten them every so often.
>
>Jim


--  APML Archives at <http://astro.umsystem.edu/apml/>  ---
             Unsubscribe at <majordomo@seds.org>