[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [APML] ST4 malfunction

Massimo,

It's next to impossible to troubleshoot something like this over an e- 
mail list but I'd remove the cover on the guiding head where the  
cable enters the back and check for broken wires. I had this happen  
once. After that I added a strain relief so the cable could not twist  
and it still works fine today.

Chuck

---------------------------------------------------


> My ST4 shows always 0 or 1 on the star brightness redout, any star,  
> any booster setting. Power is OK, the CCD head is cold. Ready for  
> the service?
>
> Massimo
>


_______________________________________________
Astro-Photo mailing list
Astro-Photo@seds.org
http://seds.org/mailman/listinfo/astro-photo